Vg30det Turbo Parts

[villain]

hey all i have a vg30det turbro

and i wanna bolt it on my rb20det.ive been told

that some banjos are different etc

does anyone know what parts i require to do this?

if so do they have any??

[armbrusb]

Hey, I did the job over a year ago. Everything fitted up very easily (banjos included) except for the fact that the VG30 does not have an elbow from the outlet (instead it has the small straight adapter thing).

The RB20 elbow is too small to bolt onto the VG30 (I am not sure about the RB25 which is slightly larger) so you need to get an elbow made by an exhaust place or something.

This is quite an easy job. If you find out if an RB25 elbow fits or not I would be very interested to find out.

Thanks.

[villain]

thankyou very much ill be doing it in next few days ill let u know how i go

[r31 Koop]

all you need to do is buy a 90 degree piece of silicone to replace the elbow and all lines bolt straight up except for the oil inlet line you need to change the fitting for this.

Pirteck or similar will be able to help you max $80 for a entirely new braded line! or 10-20 for a new fitting,

Good luck mate,

Blair

[armbrusb]

Here are the pics of what I did for an elbow. It looks pretty uuuugly! R31 Koop do you have a picture of the elbow you used? Does the silicon hose you use change the pipe diameter or do you have another piece to do that?

Regarding the fitting, I didn't need to make any changes. Mine has the ball bearing centre though - R31 Koop do you know what yours is?

Edited November 30, 2005 by armbrusb

[armbrusb]

Don't know why the pics don't work.

Edited November 30, 2005 by armbrusb

[armbrusb]

Don't know why the pics don't work.

[armbrusb]

Don't know why the pics don't work.

[villain]

THANKS VERY MUCH YOURE A CHAMP!!!

ill just pull car apart and see how i go in next few days hehe

just wanted to avoid being without it for too long:)

[villain]

i thought you meant the inlet mouth is different but do you mean the outlet to intercooler is different?

[armbrusb]

The inlet pipe fits straight up. The elbow on the outlet is different. The compressor houses are two different sizes and the RB20 elbow won't bolt up.