Jump to content
SAU Community

Electrics Prob

RU34ME

By RU34ME,
in Engines & Forced Induction

 Share

Recommended Posts

RU34ME Community Regular

RU34ME

Posted
Posted

hey guys...

i still cant start my 180sx...

it has a rb25det in it... originally we thought it was a compression problem, but it was jus a faulty guage..

it has spark, fuel and air, but not starting... any ideas of what i could look at???

i need help wid it asap!!! cheers, thanks guys

ryan

0410 332 673

Link to comment
https://www.sau.com.au/forums/topic/96642-electrics-prob/
Share on other sites
paulr33 Grand Master

paulr33

Posted
Posted

stock ecu or aftermarket? have u tried stock ecu diag with consult? i had an odd problem of my rb25det wouldnt start, unplugged water temp sensor and it cranked over first shot. stock ecu diag reported sensor ok and working but it was reporting water temp -44 degress. however i fried the sensor by my own fault so its unlikely your case is the same, maybe worth a shot tho. stock ecu diag would likely help a lot

Link to comment
https://www.sau.com.au/forums/topic/96642-electrics-prob/#findComment-1752597
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...