Jump to content
SAU Community

Recommended Posts

hi all,

Cruising into work tonight i decided to have a bit of play, shifted into 4th at high revs and wastegate didn't open (couldn't hear screamer) and i'd lost boost. I can hear turbo spooling but not coming onto boost. I pulled over and car began to idle really rough. I'm not too sure what's going on, any help will be appreciated.

Car mods:

GT35/40

PowerFC

FMIC

Blitz spec R Boost controller

bosch 040 pump

turbosmart ultragate into screamer pipe

550cc injectors

Turbosmart BOV

Thanks.

haven't been able to really check anything yet, cause i had to get to work. But there was no loud bangs or anything.. Definately gotta check everything out tomorrow. I'm hoping it's just something simple.

I don't think it was makin boost, or very low - not pulling as hard.

Yeah, check for leaks on the intake side. Your wastegate won't open until you hit a certain level of boost, but your turbo would still get spooled.

You should take it easy, since it therefore means your turbine speed isn't being regulated anymore.

Any leaks in the intake would cause rough idle, and stalling issues. Just ask any n00b who sticks a venting BOV, with the spring set loose, on their car.

would that cause the rough idle though?? i'll check her all out in the morning and get back to ya. thanks

i have blown 2 IC hoses since my new install went in .. pretty close to yours.. only thing is that my car wouldn't run AT ALL with the hose off.

could be a split in a silicon hose enough the limit boost but allow air though..

only other thing would be turbo seizing.. or gate stuck open..(but you would notice the noise with a screamer pipe..

good luck.. hope it aint nothing major for you.

hey all,

thanks for all the help, i actually found the source of the problem. I've got my Z32 in series with the intercooler and the Z32 had actually cracked underneath. Replaced it and running like a beauty again.

B)

Z32 is right before intake plenum, sits right near the top of the radiator.

I'd have to agree on the abuse side. <_<

Edited by AlpineFreak

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...