Jump to content
SAU Community

Recommended Posts

do most turbos produce a bit of excess oil which coats pipes heading to intercooler and possibly thru fmic or is this a very bad sign.

engine is in very good condition so it shouldnt be coming from that.

are my turbo's f**ked???

i took air pods and pipes off to clean and decided to take off intrercooler piping to clean too and noticed oil as u can see below.

so, whats up with that - anyone????

post-24483-1133590974.jpg

post-24483-1133591195.jpg

post-24483-1133591312.jpg

time bomb. That is way too much oil. I just took the intake piping off my 97 model gtst. I would describe the oil as not being visible to the eye. It is only evident if I run my finger on it. My finger turns slightly brown.

Your turbos and or engine are dieing.

the engine that was in the car previously was very smokey and was rooted. This is why he replaced it with an rb26 out of a 33 and so r the turbos. ( a month or so ago) it has only been running for a couple of weeks and the oil in the engine is very clean as it has been rebuilt and the oil in the pipes is much darker.

is it possible that the oil is from the old engine and the guy who put the 33 engine in did not clean out those pipes or intercooler.

is it possible to tell????

Edited by RRR32_GoDzIlLa

Yeah it is - clean the pipes.. let it warm up and take it for a drive... then come back pull the pipe off and check again? if its not there then there is your answer.. but seriously i wouldnt be pushing the car (i.e up the boost, and push it to its limits) as its a time bomb waiting to go off.. Just baby it, or spend the money and get the seals replaced.

Dayne

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...