Jump to content
SAU Community

Recommended Posts

last friday I was having a crap day at work, and then I had to pick up my little sister at tutoring in homebush. Problem is the quality of Parramatta rd is so bad that I try avoiding it like the plague but this time it couldn't be helped. Anyway, it felt more like I was riding a donkey on uneven ground or cruising in some rough seas or something. Then on the wee hours of sunday morn on my way home from the city I was cruising up epping rd about 80km/h when I hit this fu_King great big pot hole that came out of no-where so hard that it felt like I hit a land mine or something. It was so hard that it shook the whole sunroof/light controls panel out of the ceiling! Luckily (or not) it was just me in the car! Anyway, I really think the minister of transport or roads should get off his ass and fix the damn roads.

just a thought...

AF

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/
Share on other sites

awww there was quite a large pot hole (well it was more like a open cut mine) on parra road that i almost hit yesterday.. i swear i woulda lost my tire down it, i couldnt even see the bottom..

and yeh parra road is awful. the worst road ive eva been on anywhere.. including over seas in places like romaina singapore (there nice roads there :)) and a few others.. dirt roads are actualy alot better then it in some places!, lol

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1764929
Share on other sites

I'd say it's wishful thinking that the quality of some Sydney roads will ever be improved. For a main road into the city, the state of Parramatta Rd is disgraceful.

I also got a buckled rim from hitting a huge mother of a pothole in my Prelude a few years back (I was following another car and didn't see the crater till the I was on top of it). Needless to say, I wasn't impressed when I had to fork out $200 to get the rim replaced. I felt like sending the bill to the RTA.

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1764947
Share on other sites

Yeah they are shocking. I was up in QLD a few weeks back and their roads are much better. However, with Sydney traffic and road usage it's almost impossible for them to fix it even if they want to. The damage has been done....

I got a buckled rim from hitting a huge mother of a pothole in my Prelude a few years back

Sorry to hear about that! (the prelude ownership :lol: :) )

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1764966
Share on other sites

the only way to get around this problem is to move somewhere else. sorry but i think they will never get better. the huge volume of trucks that travel on parramatta road is what kills it.

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1764988
Share on other sites

Straight down Parramatta Road to where the clock tower is, make a left and head towards Ashfield - WELCOME TO LAND MINE TERRITORY! :) Funny thing is that everytime I drive through there, I see more and more modified cars :D

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1765270
Share on other sites

Sydney has some of the worst roads in the state.

For a place of its calibre, its a joke.

Surely they ain't short of a quid to fix them with the density of people in the area that pay tax, rates etc etc.

Maybe they just can't justify closing the roads for repair, because of how busy it is?

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1766341
Share on other sites

Drive into Canberra and it feels like the roads have been replaced with grippy glass, it's that smooth over there.

I wonder why that is... :)

I love Canberra roads. You can run your suspension with track stiffness and not need to make weekly visits to the chiro........

One of these days I'm going to have to pop the semi slicks on the car, drive to Canberra, and film my own Rendezvous one night.

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1767443
Share on other sites

haha, aww today was funny seeing how many partly melted roads there where..

old northen road in glennorie.. the long stright part where it goes from 60ks-80ks, its all sticky as! , would give the best grip for a drag i think :(

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1769010
Share on other sites

the street behind my house requires 4X4 it's so bumpy and full of grand canyon sized potholes.... oh and it's a bloody sealed road......... in Bondi..... go figure. Most of the main roads in bondi suck as well, I think I scare the shit out of people driving in the lanes next to me while i swerve from side to side trying to dodge the bloody craters...

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1770567
Share on other sites

I think I scare the shit out of people driving in the lanes next to me while i swerve from side to side trying to dodge the bloody craters

Now that you say that, there was one time when a cop was behind me and I was doing this "dance" of sorts. He/she (was at night time) started to flash their hi-beams at me and come closer to the back of my car. By this point I'd left about 100m between me and the car in front so I could see the minefield :P I carried on "dancing", the cop thought I was drunk and was about to lose it when all of a sudden I saw his car bounce LOL!

He kept his distance after that :D

Saying that though, 4WD drivers shit me on these roads as they have no problems and want to go through at 100km/hr - spare a thought for those who do not ride 5ft off the ground~

Link to comment
https://www.sau.com.au/forums/topic/97302-crap-roads/#findComment-1770642
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...