Jump to content
SAU Community

Things To Do And See And Go While @ Dunsborough.


Recommended Posts

G'day I am doing day trip to dunsbrough on Monday...work (only cuople of hours)

but is there things and place to see while there? (work is paying for petrol)

anyone know good place to see?

cheers

Joe

If your driving fast enough you might only see a quick shadow cross over your car and pass straight through.

If your driving fast enough you might only see a quick shadow cross over your car and pass straight through.

Joe

Too late mate....toolies week was last month :lol:

:lol:

Dunsborough is where you go to get away from it all

Which by definition must mean there is nothing there. :)

Bootleg is good place but if you are only there for the afternoon a bit too far out of town if you are limited for time.

It's a nice area to travel around for a few days but an afternoon is limiting.

Were from down here...dunsborough is a hole... if you surf you should come down that little bit extra to yallingup or margaret river, or even if you dont our beaches are still worth the visit !!! If ya see a Blue 33 thats me or Rod!!!

i was there this weekend and saw a silver 33 with blue graphics...that wasnt you was it?

we went to a couple of brewerys along the highways, you can drive to cape naturaliste, yallingup beach, margaret river, busselton...theyre all close enough.

nah that wasnt me, but i did see it when i was in busselton on saturday...some guy driving it with his mrs...

also saw a black (i think 33) in busso on friday night, he gave us a wave but i had already gone passed....



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...