Jump to content
SAU Community

Recommended Posts

Try using the search button.

Have you ever considered adding the "Try using the search button" to your signature, it seemes every second post of yours uses it? :D

hi all, i'm in the market for an r33, i was just wondering if i can ask some dumb questions like whats a stock gts-t run down the 1/4? how long does a stock turbo usually last? and if there is any common problems with em? if anyone can help it would be great thanks

Hi - welcome to the forums.

Stock 33s - depending upon the driver, track, condition of the car etc should be good for a 13-14 second 1/4 mile

Stock turbos are quite good, and will last a long time. The usual problem is that we all want more power, so as we increase the boost we risk damaging the turbo. Most people feel increasing the boost up to around 12psi (from a factory set 7psi) should be OK, but after that you reduce the life of the turbo.

As for common problems, there arn't really that many. Only ones I can think off are that the "Radius Rod Bushes"?? are often a little worn out when they arrive from Japan and need to be changed (not expensive) and that at 100,000km you need to change the timing belt (and its a good idea to do the water pump aswell) which isny the cheapest service (but not bad compared to other cars).

Common modifications usually include :

better exhaust (3 inch) from the turbo back

Front mount intercooler to replace the small factory one

Increase the boost - Bleed valves are cheap, but Electronic boost controllers do a better job.

After that you would consider aftermarket engine management such as a Power FC or other.

Now the power bug has bit hard, so you want to get a biger turbo, improve the fuel system (new pump and injectors) etc etc

The suspension and handeling of the 33's is quite good, so you dont need to modify it as soon as many other cars, but its worth considering a good set of tyres so you can use the power. Other mods often include a Hicas lock kit, Pineapples (to adjust the rear end geometry) and better quality brake pads to help you stop quicker (no real need to change the rotors unless you go for huge power)

Hope that is of some help.

Link to comment
https://www.sau.com.au/forums/topic/98725-turbo-rebuilds/#findComment-1797598
Share on other sites

Have you ever considered adding the "Try using the search button" to your signature, it seemes every second post of yours uses it? :)

Nah not really. I prefer to say it.

Sometimes if im bored ill go an use it myself and post the results.

But most things you'll find, especuilly boost level for a stock turbo, you cant say thats probably not in the top 10 topics

Link to comment
https://www.sau.com.au/forums/topic/98725-turbo-rebuilds/#findComment-1797775
Share on other sites

Stock 33s - depending upon the driver, track, condition of the car etc should be good for a 13-14 second 1/4 mile

13s in a stock 33? maybe a GTR! But for a GTST in perfect working order stock at best you would get a 14.5, which for a car 10 years plus is really good, for example the new xr6t typhoons in motor magazine got a time of low 14s, so they are really good cars!

Link to comment
https://www.sau.com.au/forums/topic/98725-turbo-rebuilds/#findComment-1798678
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...