Jump to content
SAU Community

Recommended Posts

I don't believe they will destroy the coil packs, but if you have standard coils irridium plugs will make them work harder. For the best performance with these plugs you probably need a set of split-fire coils and have your plugs gapped correctly. i.e. high boost smaller gap around 0.8 to 0.9mm. Standard boost then the 1.1 gap will work ok.

I changed to NGK irridiums about 4 months ago and had nothing but trouble, misfiring, hesitation in the mid rev range. The smaller gap solved the misfiring but the car just never reved the way it used to. This is because my standard coil packs couldn't handle the irridium plugs.

I recently changed my irridiums to NGK copper ®, gapped them at 0.9mm and the car runs like a dream. They will only last about 20-30k depending on how you drive, but for $20.00 for a set of 6 who's complaining.

If you feel that you need the better plug, best to stick with NGK platium. The only problem is they come pre-gapped so you need to order them with your preferred gap.

Paul.

umm, okay. So, should I be overly concerned about this? Does damage usually occur within weeks, or do I have a few months?

Its not really damage that occurs, it's just that they don't work as well. Especially if the coil packs are getting older this doesn't help. Eventually of course a coil pack will die. If you stick with irridums then use splitfire coils, around $800.00.

Paul.

in a good way thats good to know..when I bought my skyline almost 3 months ago, my mate made me buy the iridium plugs. Spend a fortune, then figured it was too much hassle to change them, on account of the ornament and piping covering up the plugs and coils..so they've just been sitting there in my garage for the last 3 months...

Hey can someone please explain why you guys are making the spark smaller??? I dont understand, really it doesnt make sence, well not for me anyway.

I thought the bigger the spark the better the bang?

also matty_tonkin Super cheap sell them, $20 for a set of 6

Edited by 7yphon

The deal with closing the gap is that with running higher boost the forced air can blow the spark out.

Which causes the car to go and sound like a heap of crap when it hits full boost.

I bought Iridium 0.8's for my car when it came over because even though running factory boost levels it wouldn't handle it when it hit around 5000rpm.

And plugs that were in it were Iridium 1.1's

but ive heard that compared to japan our premium fuel quality would be there everyday cheap stuff.

Thats what i know anyway, hope it helps. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...