Jump to content
SAU Community

Recommended Posts

Hi Forum goers!

I'm hoping to get some help on an issue I am having with my RB20DET.

When it was on the dyno it was found that the car is running dangerously lean when on boost. The A/F mixtures are not smooth either.

I have recently had the fuel pump changed to a higher flowing unit and the fuel lines, injector rail, injectors have all been cleaned. The people who did the fuel pump said that it was running lean so checked the fuel pressure and found that the fuel pressure was ok. They also said they checked the main sensors and found them to be in working order.

On the dyno I was lucky enough to be able to borrow a chipped ECU (thanks!). This ECU improved the mixtures and smoothed them out but the car was still running very lean.

I'm hoping someone can help give me a few suggestions on what to try or what to change.

Any help appreciated.

Thanks for reading!

Will...

Link to comment
https://www.sau.com.au/forums/topic/9921-help-engine-running-way-too-lean/
Share on other sites

Did you check the fuel filter when you did all the rest? Might be worth a look. Check the vacume/boost pipe going to the fuel reg, if it's blocked the fuel reg won't increase preasure while on boost.

Ummm..... You've checked everything else that I can think of.

Good luck

J

Check your Air Flow Meters if you have them, especially if you have pod filters. The oil from the pods can bake onto the Air Flow Meters which makes the car lean right out. Take the Air Flow Meter off and hit it with some Carby Cleaner then some contact cleaners. Refit and test again. It worked for me.

Mick.

The injectors have been cleaned (that's what I was told and have no reason to believe otherwise...)

Another AF meter was fitted and whilst this gave a slightly better mixture the car was still running lean so I'm guessing it's not the AF but a clean never hurt anything.

I haven't checked the pipe of the fuel reg. Can youpoint me in the right direction to this pipe?

Thanks for all the help at least things checked have been on the right track.

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...