What Do I Need To Make My Nonturbo

[illusiVe]

basically i have a way i can get positive pressure up to about 7psi into my non turbo R34 RB25DE neo engine. however if it hits that, the ecu cuts out and the engine stalls.

i want to obviously run +boost.. what do i NEED to get so i can run that positive boost im SURE the fuel pump + injectors can atleast handle 3-4psi because i mean common i doubt they would put in factory items which are basically 'maxed out' from factory. so im guessin its the AFM or ecu .. maybe both

so what do i need so i can hit boost

[MR R33]

get the ecu remapped

[Cubes]

I had the same issue trying to run the RB30DET on the rb20det ecu.

At around 7psi or so a fuel cut would occur and it would go dangerously lean.

Only option is a remap or aftermarket ecu as the std maps don't have the head room.

Edited December 25, 2005 by Cubes

[illusiVe]

thanks

[Greg]

out of curiosity, what is your method of producing the positive pressure?

[illusiVe]

a turbo.

Edited December 28, 2005 by illusiVe

[Cubes]

My method of generating positive pressure (hehe) is driving really really fast with a 500mm dia snorkle in front of the radiator that tapers down at a 12.5degree angle to 80mm dia, this then feeds in to the afm (mesh removed to reduce pressure drop) then directly in to the cross over pipe.

Edited December 28, 2005 by Cubes

[Greg]

a turbo.

<{POST_SNAPBACK}>

lol fair enough, i thought it might be a more unusual method since you didnt actually mention it was a turbo.

[illusiVe]

a turbo which has been 'modified' and not the usual way

[gatty]

do tell i might do it to my RB25DE

[illusiVe]

just going with normal turbo setup now.. i know it works and im too lazy to try my idea.

[smurf80]

so why dont you share your idea then...