Jump to content
SAU Community

Recommended Posts

Guest sir_GTR

Thnx Matt :D

umm to be honest I haven't really stretched my car beyond 3rd gear yet :confused:

all my runs with other cars have been from standing starts and i usually ease my pedal well after 2nd gear (around 120k+/hr) ...never really hit 3rd gear (too afraid of speeding fines)

So i dont really know how fast i can get to with my 3rd before changing to 4th...Will i get to 4th gear with the 1/4 mile run?

sorry for so many *newbie* questions :bonk:

Andy,

Adelaide International Raceway is straight up Port Wakefield Rd heading out of town, you can't miss it on the left hand side.

It's ~$50 to run all up, for as many runs as you can fit in.

Yep you need an ADR approved helmet, & you must wear long pants/long sleeved shirt.

180km/h is ~111.85mph, which is a good enough terminal speed (TS) to run into the 12's with decent traction.

You probably won't hit the limiter before the finish line but you "may" before your terminal speed is read.

TS is an average of the last 30' of track before the line & 30' past the line (I think?) so your elapsed time (ET) won't be effected but if your going quick enough you "may" hit the limiter after the line in that 30' during the TS reading. Hope that made sense :D

On my last run (Nov01) I ran 13.1 @ 109.5, & from memory I backed off just after the line doing well over 180km/h, I probably would've got a higher TS if I'd kept my boot into it a touch longer :(

My car when stock (or close too) hit the limiter @ ~190+km/h so I think you'll be fine :)

WTF? How did my post end up after yours Andy? Oh well never mind:)

Fire away with the questions mate I'm happy to help if possible :)

Yeah you'll need 4th just before the line, unless the 8k rev range of the RB26DETT can get you over the line in 3rd? It might be worth asking the GT-R guys who drag race their GT-R.

All,

Something to keep in mind for drag strip first timers. The AIR drag strip is totally different to launch on compared to the average set of lights! You'll need more rev's off the line @ AIR or you "will" bog down badly :mad: It's a huge shock to feel how quickly your car takes off (or feels like it is) on a grippy VHT prepped surface :mad: Big rev' launches also put more strain on the drive train due to the lack of wheel spin that a road surface would normally reduce!

Hey Guys,after going to the drags sunday i was thinking that we should go to the next meet where hopefully Johns R33 GTR will be there to crack the 9`s.We can be like the support racing to the main event.We can go out and have some fun aswell as support John to hopefully a record run.

We`ll have the best tuners in Adelaide(TILBROOKS) out there so we can nag em(only joking Martin).

LETS GET AS MANY SKYLINES OUT THERE AS POSSIBLE.

I have atleast 3 CAMS/ADR approved helmets that i can loan.

all i want to know is when is the next meet?

Matt

I'd be up for that. I think that from memory that the street meets are on the first weekend of every month. It would be cool to get a dozen or so Skylines out there. Now I just have to get my clutch sorted.

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...