bigboss59400

I also asked but I wanted an other source to confirmed so that I will not have any surprise when I will changed them. so if anyone can give me some info that would help me a lot? thanks for all

Hello, Since all my bushes start to die, I found strongflex be a good replacement : https://www.strongflex.eu/en/nissan-skyline-r33-93-98/1574-286217b-full-suspension-bush-kit-r33-r34-5902553521870.html#/34-ffront_anti_roll_bar-22mm I have a r34 gtr 1999, I want to buy this kit however I don't have the car this week and I can't check the diameter of : -Front anti roll bar -Rear anti roll bar -Steering rack mount bush -Front tie bar to chassis Can you advice me the corresponding diameters to match with my car ? I can provide more info on it if needed Thanks for all

Yes I mean adding hood dampers. Well I already order to this seller...and the kit he sends me doesn't fit without making 4 customs plate on the r34 gtr....

Hello, Any idea where can I found a R34 bonnet damper for OEM hood ? like the tein however they seems to be discounted Best regards

Yes I removed all the screws...the speedometer part is still blocking in some way; hard to explain without a video. Yes I noticed the DIP package of the eeprom however since it's on the other side I can't determined the exact part number and thus the interface of it (SPI or 3 wire) and the memory organisation. Anyway I will try to removed the front cover thanks

well I try again without dissasembling the front but for a R34 nismo gtr cluster it's not possible I mean the speedometer part is blocking in some way... So I will remove the front cover like you have done on the picture in fact Thanks for your help

Thanks for your help not same result if powered in the car or outside I got white screen Flex ribbon between motherboard and LCD assembly is seated correctly also this flex is fine I made a continuity test on it

thanks for your input So power pin 1 2 3 at 12V and 13 and 14 at GND and the MFD start Any idea why I get a white screen after replacing the screen (even by putting back the old one ?)

Hello, I have some issue with my MFD so I'm wondering how can I start it outside of the car. I obvisouly connected pin 1 and 2 to 12V and 13 and 14 to GND and also try to wired the ignition pin (12) to 12V But the MFD still refused to power on. The MFD start when installed in the car. PS: pinout of the MFD in attachement New Bitmap Image (2).bmp

hello how To remove the cluster board ? I removed all the screws however there is something which is blocking in the speedometer area do I need to unclip the transparent front, unscrew the 2 screws which holds the speedometer and also remove the needle? or do I need to unclip the black plastic (and so the front transparent plastic which is clip on the black part)? best regards

Hello, I'm not able to figure out the size, color and number per color I think it's T6.5 and there are 3 colors, right ? It will save me disassembling the cluster just to order some leds one... Best regards

you are the master ! Thanks for the info

Hello, I'm in the same situation; I bought a new nismo r34 cluster to fit on my R34 gtr Could anyone give me some info to adapt the mileage ? Otherwise if the chip where the mileage is stored is the same then I will do some soldering job... Best regards

Hello, I'm looking for a R34 steering wheel, without airbag, in the badest condition possible (so cheaper) Best regards

Found it ! it's from a japanse ! 1.5K with your steering wheel from what I understand (which will bring it much higher with shipping cost and taxes....) I finally find a local french company that can do it for 1K, must find another steering wheel because 1 month delay ! Will post a picture when done because it seems to interested some of you

Oups sorry I didn't noticed I was logged in I will keep the airbag so no problem

hello, My OEM steering wheel is tired and I love this steering wheel However I have no idea where I can have one like this. Any idea ? Best regards

Because at least 20 years old system! No info on this even an user manual for this exact model. No worries, I will put a newer one soon. Thanks for the info and I finally managed to get it out.

where to find this r34 wiring diagram ? WD8E0R34J0 I can pay for it if needed

Hello Can you confirm that the R34 don"t come with an alarm ? I have a code alarm installed; and I'm starting to remove it (because for my battery get flat in one week without used) However previous owner made serious installation of it and not easy to removed..I will need to removed the dash to have space !! That's why I asked you to confirmed that this module is an aftermarket one Best regards

Hello, I'm wondering if there is a way to get the clip which hold the front glass to the back. There are 5 clips by headlight. Some are missing on my headlights and they don't have a part number (so a full headlight must be purchased...) Best regards

you have a PM R33 won't do it sorry West but thanks for the offer

thanks for infos guys ! I will look for yahoo auctions then because hard to find in Europe at decent price!

What does IIRC means ? That's the point I don't got it; if the airbox are the SAME why does the r33 snorkel doesn't fit on the R34 ? Thanks for your help

Sorry to dig this post But I'm wondering this question too ! So does r33 airbox same as r34 ?