dead32

try find out the part numbers to compare? if part numbers the same then the joints are aswell?

djr81 + beer baron... i dont know if this helps but in my mates sprinter he used those alloy spacer ^top right^ of that supplied picture as a way or reducing bump steer.. it changes the angle of the lower control arm and reduces bump steer from a lowerd or coil overed car.. i know in my gts-t32 bump steer is an issue atm for me.

mztrbo, why would you put in a set of injectors that had problems in a friends car? get them cleaned and tested etc.. if they are fine after that then put them in, from what ive heard many times again the "jet" at the base of the injector is different on the rotary injector due to the fact then when it sprays fuel into a rotary it has a shorter time to put in the right amount of fuel.. hence they squirt rather then atomise properly.

gl with this mate.. just make sure you get the preload right

mate from experience get a fuel pump first!!.. cost me a motor then a good flowing exhaust... then a front mounted intercooler so when you do raise the boost level the inlet air temp is much cooler allowing for the boost level to be raised.. all thats left after that is a panel filter and you will see your power goals... shortly down the line you might want to factor into your bill a deccent clutch.. as the extra power going through an assumed standard clutch wont like it very much...... to find cheap items etc... cheak out the for sale section and bussiness traders on this forum.. all else fails theres a sticky section power upgrades for rb20 powered cars with dyno results http://www.skylinesaustralia.com/forums/in...howtopic=103095 enjoy ..... ryan

ahh i seen you at a skid pan day late last year... nice car free bump

if you get stuck ill give you 250 posted for it... up to you.

p.s i wouldnt pump petrol down the bore...

goin by my sig and the picture i supplied theyre chrome m8

front bumper? where are you located?

looks like ive got it all wroung then :S.. they will deff fit r33.

2 for 50? or 50 each? sydney?

http://www.skylinesaustralia.com/forums/in...howtopic=133295

my torque beast lol.. still have mi silver nugget

LOL i thought gtt wheels was 18's.. gtr rims are 18's in 34's arent they? i know 1 is 18

they are very nice rims, however i am looking for offset dish plus a downgrade to a small wheel.... ill keep it in mind mate thanks for the offer.

hi guys just wondering if anyone would like to swap mywheels for theirs? im looking for a new look for the car.. prefure some dished 17's.. my wheels are in good condition with minor gutter rash on 1 wheel.. 18's by 235 all round front tyres 80% rears bout 50%...... heres what they look like on my car... im in syd

for the price of motor alone, wouldnt you go close to rebuilding a rb30 block with 26head? you could use the 25 box Aswell? just a thought if your considering rebuilding a front cut.. your only gona use the motor anyways from the cut.. makes more sense to me and itll make more power which is what we all want..

i think my fav is the air bowl... haysay;'s right you got teh good's

very well said N I B...from a less technical person such as myself i agree

congrats mate, im glade to see im not the only one sticking with the rb20 for 230rwkw ++

rough km's the malpassi was fitted for? it should fit rb20 right? is it rising rate? me thinks it is.

GO TEH f**kING P PLATES! LOL street car, drag car... who cares still a quick fuggin car and sounds tough.. jelousy's a curse shibby :s

sweet vid's!! i wish mine did that lol

i <3 these wheels nick, look mighty tough free bumpskies..