NYTSKY

27. With the back of an 80yr old

Sold.

Work Meister SP1 in white with polished lip. 18x9 +30 18x10 +42 With roadworthy tyres. $2500

Are you still running the 25 tune?

Check to see if all the injectors are firing. Also could be a loose connection in the coilpack loom, maybe swap it with one you know that works. Water in the pipes could just be condensation? Or is it more than that?

Cheap injectors for big horsepower! Quick sale $400 Delivered.

Considering both black and green are using the same turbos, it shows what a good engine build does for response/power.

^^^^^^I agree, doesnt really give that much away in low down response and has a healthy top end, plus the boost curve is almost flat 20psi.

This is probably one of the most common mistakes people make when getting Poncams. I know its a bit misleading to some, the way Tomei have worded the description for Series 1 and Series 2. So here is what you need to know for future reference: All RB25DET motors with the metal CAS and built up to 9/97 will need the Series 1 Poncams (p#/020) All RB25DET motors with the plastic CAS and built after 9/97 will need the Series 2 Poncams (p#/050)

Thats very,very impressive for 1bar and pump fuel. And looking at the 500hp graph, it certainly shows there is much more left in it. Doesnt dive over at all. Ill be doing a direct bolt off/on comparison between the GT35 and GTX35 in the coming months.

Certainly been a long time coming. Is it going to the full throttle friday first week of Feb?

If you can find a decent one, get a 91' Corolla Seca hatch with 1.8L 100kw engine. Exhaust, intake, low and wheels. They hammer

17x8 17x9 Volk GTP wrapped in Federal RSR semis. Barely used. $1750

Exhaust is finished, work of art! I bought 2 cats, one 5inch 400cpi Euro 4 and one 5inch 100cpi. Still the same clutch but bought an alloy flywheel from the states. Should have the car home very soon, just some minor things to tidy up. Pic of the mid section.

Nice work Brad. A good friend of mine just got a full cage for his VL by a well known workshop. It was very average and the car had to go back a number of times. And it wasnt cheap to start with. If the 33 goes track only ill give you a buzz.

Its a plenum. Same as every other plenum.

Why are you using a photo from another members thread?

I have one, currently near Charlestown. White, resprayed about 8 months ago but has small crack at the bottom. $300 minus fog light/indicators.

I have one. $50 plus post.

Reason for sale? Neg on price?

I have a 3.5inch-3.75inch HKS exhaust for sale if you are interested $400 and it yours. I made 15rwkw gain over my 3inch. I have replaced it with a custom 4inch turbo to tip and it wasnt cheap! Material alone has gone past the 2k mark.

Toluene is very bad stuff. I certainly woudlnt want to be in contact with it as commonly as filling up a car. Thought about E85?

Still available.

Rail and injectors sold pending payment. Most things still available. Cam covers Cam gears CAS Cams Plenum

www.rawbrokerage.com Ricky will have some im sure. He sell spares and in the US.