Jump to content
SAU Community

Finchy33

Members
 View Profile  See their activity

  • Posts

    121

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by Finchy33

  1. Finchy33
    Oil pressure I don't trust the stock item.
  2. Finchy33
    my deadspot is when im fair up it. AFM reversion
  3. Finchy33
    GTS = Non Turbo GTS-T = Turbo Could of had a conversion though. Yes they are RWD. Basic bolt ons and some coilovers and get on the track.
  4. Finchy33
    Rings PCV Breather What colour was the oil? Could be head gasket... Do a vacuum test and leak down test.
  5. Finchy33
    If they aren't enough PM me and we can organise something...
  6. Finchy33
    PM dirtgarage for your solution
  7. Finchy33
    Nah, this is a 33. I spotted the car again on Monday, can't remember where though. I was on my way to tighes hill TAFE on my road bike funnily enough, so somewhere between here and there Light grey/Silver two tone. <------I've got a white series 2 33 with Racing Hart CPF Tune-R rims. I never take much notice so here is a wave to everyone who has waved and I've ignored
  8. Finchy33
    I've got the Split JJ one, I haven't had problems but a lot of people have. Wastegate flap hit the sides etc... Do a search, it's been brought up 100's of times.... I'd stick with the bellmouth, it's a safe bet and I don't think there would be a difference between the two. I'm not plugging just jap but they offer a good turn around and back it with FULL warranty. For the money they are solid products.
  9. Finchy33
    Just get the bellmouth from justjap. And get a hiflow cat at the same time. The pictured item looks exactly the same as mine from justjap. Buy local for support http://justjap.com/store/product.php?produ...=276&page=1 http://justjap.com/store/product.php?produ...=276&page=1
  10. Finchy33
    Spotted a grey 4dr at broadmeadow the other day. Quite an attractive young lady driving it too
  11. Finchy33
    My 33 has a PFC. When it's really cold it cranks and starts but I have to keep revs up above 1000RPM for a few seconds with the throttle, otherwise it sort of bounces revs and stalls. Is this a cure or any other ideas??? Cheers, Ben
  12. Finchy33
    Forget your tuner, should of got a vipec...
  13. Finchy33
    I'll def be in for the next one, I have to start checking this section. (Thanks Dave )
  14. Finchy33
    An updates guys? Is this still on?
  15. Finchy33
    What is your budget??? CES gear is pretty nice...
  16. Finchy33
    An AVC-R is NOT going to be any easier to use... It may have a lot more features but unless you have a heap of power you won't need them.
  17. Finchy33
    location????
  18. Finchy33
    Turbo timer...
  19. Finchy33
    Paul, do you have a link to that youtube video? I've seen it mentioned before but haven't found it...
  20. Finchy33
    +1
  21. Finchy33
    x 2 I have this one on my car, with a stock S2 bar you won't have to do anything to the foggies or indicators. You need to trim some of the bar on the passengers side under them though. Nothing major. I installed in about 3 or 4 hours over a few beers... Big tip, bolt it all together, get the pipes sitting properly THEN tighten everything Edit: This type of S2 front bar http://farm3.static.flickr.com/2093/203340...6708a35a8_o.jpg
  22. Finchy33
    Mate, closest I have seen is the ARC turnflow unit... You don't have to cut the reo, painted black it'd be v.stealth
  23. Finchy33
    its as simple as a hammer and a bit of pipe or even broom handle... as soon as the middle is out it'll all fall out fairly easy. I'd personally run a pipe on the inside of it.
  24. Finchy33
    http://www.hicomp.com.au/
  25. Finchy33
    Pics of the turbo mate?? Housing specs??
×
×
  • Create New...