GTR_JOEY

These ones are direct bolt in because theyre just the stock ones but recalibrated to nismo specs the z32s dont bolt right in either, they have different size flanges and u need to change the plug found a link on it http://www.skylinesaustralia.com/forums/topic/57632-nismo-afms-for-gtr/page__p__1110524__hl__nismo+vs+z32+afms__fromsearch__1#entry1110524

http://www.skylinesaustralia.com/forums/topic/389054-fs-standard-and-aftermarket-r32-gtrrb26-parts/page__p__6199523#entry6199523 hey mate, i have most of the gtr intake piping , theres a pic with all the piping i have, let me know if i have what u need

no...of course.... not

no need to be a memeber?

its a f#uckin pain in the arse is what it is... pretty much cant drive at night and pull up to a set of lights without the awd dropping out let us know how u go and if anyone else has any ideas it would be much appreciated btw im also running a PFC, maybe that has somthing to do with it? im changing to a LINK soon so we will find out!

cleaned up the main battery earth i also had some fookin weird custom earth job from the bloke before me the conected to the strut tower... i think he had tried to fix the same problem by getting a new battery and alternator... obviously didnt help

exacty same thing happens to me i found a couple of earths that were a bit dodgy and sanded it back... this did fix the problem for a while, but it came back again , If you figure it out for god sake let me know what it is lol I find it does the same thing when u hold the power window buttons down when they are already down.. seems like it gets a large current draw and drops the awd for some reason

^^this is not a bad idea at all lol

that doesnt make sense but no worries

problem solved... :banana:

Fuc$ you do a lot of flat bench press, maybe try doing more incline

If you put unbalanced tyres/rims on a GTR with out getting a proper wheel alighnment it will Fu$k with the torque split gauge have u done this?

sugary drink will give you an energy spike, it will not last very long as sugar is the most simple form of carbohydrates...then you will come down

might bring the GTSt, GTR isnt ready yet.... Eddie you organise it mate, did a good job last time

woulda been torture breathing in the fumes as well hahah ill be up for another cruise to where ever ill drag tim along as well

it belongs to tim88 He's only had it for 2 months haha

Made this to cover up the pods on my R32 GTR and keep the cops off my back... Its for sale right now in the FOR SALE section wish i had a picture of it in the car... doesnt look half bad from the top

haha You have to grow up to be like someone Noel you have too much money!!!

Paul and stevo ...BFF's lol

Pics If you want pics for parts i havent show PM me or ill send an MMS

Hey guys Got some bits and peices left over from my build...prices are Neg. need to get rid of this stuff its taking up too much room Stock parts Rb26 Harmonic balancer, includes bolt and spacer plate, small chip in it but still works fine $70 R32 GTR Front mount intercooler (has dents and bent fins but still works well) $50 Pretty much all the plumbing in the engine bay for the turbos, IE manifolds, intake, hot side of the turbo etc (let me know what u need and ill give pricing) Stock RB26 rods in good condition $80 RB26 timing belt $20 RB26 thermostate $15 Turbo oil drains (contact for pricing) Metal turbo and dump pipe gaskets $20 RB26 stock dipstick $20 RB26 ignitor $40 Rb26 sump oil pick up and stock sump baffle plate (contact for pricing) Stock turbo water/oil hard lines (contact for pricings) Stock R32 GTR airbox (the one that sits in behind the front bumper and directs air to the top airbox) $40 Stock oil filter housing, (one of the sensor electrical tabs has broken off but should be an easy enough fix) $40 AFTER MARKET PARTS Apexi filters with adapters (big scratched up) $30 Nismo single coppermix clutch $50 (comes with friction plate but is worn) can buy new ones through RHDJapan) push type Custom made air box to cover up pod filter set ups (keeps the cops off your back) fits 32 GTR dunno about 33-34)$35 Also have a Apexi PFC no hand controller, suits R32/33 GTR $450 like i said everything is negotiable...pics of everthing to come... PM or message me on 0432528844

buy a clean example to start with

glad to help

Hey guys I have for sale 2x nismo calibrated AFM's, they have been cleaned, serviced and recalibrated by Australian fuel Injection http://www.afiaustralia.com.au/home basic run down of my situation is i had these AFM's (before recalibration) on my old set up before my engine dropped compression in one of the cylinders. I decided to go all out and chase some big hp figures so i had my afm's sent away to be recalibrated. This allows for greater power potential/tunablitly over the standard AFMs while maintaing a stock look as they bolt straight back into standard plumbing whilst keeping standard plugs. Reason for selling them is ive decided to go a different direction with my build. Ive recently purchased a LINK ecu that does not require AFM's so as u can see i no longer have a need for them This is a far cheaper option then buying nismo afms, and a lot less stuffing around then buying z32 afms that require modified plugs and plumbing to make them fit. http://www.ebay.com.au/itm/Nismo-Mines-RB26-GTR-Air-Flow-Meters-recalibration-/120491260709 as you can see from the link above it costs $275 per afm to be calibrated + cost of shipping to have them sent there and back.. all up over $570. They came with a 12 month warrenty which has now expired as i had them done at the end of 2010, but since then they have been sitting in the boxes they came in and havent been used so they ar good to go Im chasing $450 dollars for both of them, this includes shipping to anywhere in Aus so as u can see im a a bit of a loss here. reason for selling them this much cheaper is 1 i need cash to fund the new set up 2 a corner of one of the afms has broken off so now it has 3 mounting bolts as appose to 4. This hasnt effected the performance of the afm's on the previous set up, nor should it affect it now, mesh is still in good condition (pics included) as stated above i havent had the chance to use them yet so if they were not to perform as expected i would be more then happy to refund the full amount minus the shipping costs. (check my trader rating as its all 100% positive) Located Sydney contact number is 0432528844 or PM me

Sholda done your engine bay Mcavoy