34GeeTeeTee

Recaro and Bride rail SOLD pending payment....... For those that have text me about the cage, this is a pic from the original seller of it - Feel free to laugh -

Hi Guys, I want to get my car back on the road so will need some of the stuff i have that is not needed to get it driving to sell so i can tune it...... R34GTT Standard airbox and Snorkal including Apexi air filter, all in top condition - $180.00 (Seen one currently on Ebay at $250) R34GTT Standard front brake rotors, unknown condition as they came with the car - $45.00 R34GTT Standard fuel rail setup - $20.00 (Good for clubbing people with) R34GTT Standard exhaust manifold - $50.00 (Plenty of people making good power with these and a low mount turbo setup) R34GTT Standard plastic engine cover and brackets etc - $50.00 Walbro 255L fuel pump, removed from running car a few weeks ago (Swapped my GTR pump) - $60.00 Nolathane (Brand new in packet) rear lower control arm bushes to suit R34GTT (Mine took R33 for some reason) - $50.00 Mint Recaro SR3 Trail Series seat, this is one of the cleanest examples i have seen, it matches the skyline interior perfectly, comes with Bride rail to suit R34 - $550.00 Brown Davis roll cage with side bars and with 2 x new Drift 5pt harnesses, this also has Cams certification, built in 2010, has not been bolted in my car - $1250.00 New 235/40/18 tyre (Sunew or something) - $60.00 (Do some skids) 50% tread 235/40/18 Nankang tyre - $30.00 2 x 235/40/18 tyres with camber wear, look new on 90% of the tyre - $50.00 Standard BOV with rubber intake piping and steel plumback setup, clear defects - $80.00 17x8 & 17x9 Starcorp Racing Tracer II rims with new tyres - $350.00 (Look ghey but good for skidz, if they dont sell they will be fried ) I'll have a look around the shed as i know i have plenty more i can sell to get the bills paid (Fkn $520 power bill due to power tools ) and then get my car running. I have some stereo gear as well, PS3 games and G27 wheel setup with Bride copy seat (No good for cars) etc... If any genuine enquiries and pics are needed its no problem at all. PM or text on 0434353292 (Mat) Buy my sh*t

$500 cash money? Last chance before i post it up on Ebay

Haha oh yeah Didn't you say you already had aftermarket injectors before the new upgrades Hanaldo? If that's the case they may be the same as the SARD's, did you have any rail spacers? I think it was about a 12mm spacer...

My GTT uses 11mm But that's a different story... The SARD 550's 3/4 height injectors i originally had came with a rail spacer too, these were advertised as direct replacements...

Do a search and look for Simon-S14, he posted up a thread with all the NEO injector info a while back.... Hope it helps.

Not a bad looking part for the money, and delivery was really quick too! Haha yours will be nice and shiny, mine is dull and black.... The beanie is a loose fit, the guys i got it from had a smaller one but suggested the one i have.... I asked Simon-S14 if he had issues with heat in his thread and he said even with HPC coating etc it melted paint, but he was at full boost 90% of the time, mine will be opposite.... It is a tight fit in terms of Cam cover and tower but i left the tie wire off so i can ask JEM if it is fitted correctly.... YES you need more high mount

Yeah thanks, i originally saw the post in the Cosmetic section i think and didn't like any of the ones posted, then a late night cruise on Ebay and i saw this one and for less than $30 delivered it gets rid of the ugly plastic cap and helps highlight Craves handy work... If you want one and cant find it i should still have the shops details somewhere

Motivation has been restored and mods are getting done again, here a few updates - New oil cap (Not necessary but couldnt help myself - New boost controller, decided to sell the GREDDY - Turbo Blanket, not sure if it will work properly but really hope it does - Airbox modification, purchased this from Bronx here on SAU and carried out a LOT of modifcation to make it fit - I am now finally at the ECU stage as the thing is ready to run... I have had help from some very genuine members on this forum which has really helped and also motivated me to get this finished so i can finally do what the car was built to do..... I will have regular updates over the next few weeks with progress. Next on the list, Craved Coatings for the wheels Still keen on BLACK unless someone can advise otherwise... Gunmetal was second option but if i dont like the black then i guess i can go to 9.5 all round... Cheers Mat

Wow!

As amusing as i find the posts above - The thread is FULL on information that should assist with any turbo choice decisions

Seems like more of a Boostcruising question the way its worded.... The Dyno graph and video show exactly what its like, bolt one on and find out

More power will be my reasoning, but the emissions side of things is important for me because i do want it engineered so the only way it would have a hope in hell of passing would be on the Jungle Juice... Be interesting to see how it goes... Being that it is sustainable and being produced in Aus you think the government would be keen on promoting it and not scaring people off it with pricing.... Also the pricing shouldn't fluctuate as badly (unless there is a natural disaster or something) i guess....

Haha OK, YOU have a legit excuse But you are all setup for it so go get the WA government sorted

You know you wanna!! As soon as my financials are sorted ill be getting tuned on it AND the nearest servo is about 25mins away, so dont use distance as an excuse

Hahaha Ill drop my wheels off to Craved Coatings one weekend soon and give you a call to see if i can get a run with you so motivate me a bit more That looks like it comes on hard!!! And impressive result considering the boost, BEST thing you did was take it to a decent tuner, your last guy will get the flick from now on i hope? Good result mate!

If this falls through PM me, cash waiting now

Then i need a hacksaw = FAIL

PM's replied, not really keen to separate sorry guys.... Some dodgy pics -

Haha AWESOME! i thought the goal was conservative I actually thought running a screamer had a negative affect for some reason... Thoughts??

Assholes! Hopefully the NSW Police Force keeps up their recent record and gives these clowns what for

Sounds awesome!!! Everyone loves a bit of gate Bet your glad you were forced to take it in early now eh? Makes up for the weekends bad luck What is it making? Close to expectations?

Not sure if you are set on the RB20 but i've been watching an RB25NEO with inlet and exhaust manifolds, OP6 turbo, injectors etc... Looks nearly complete... Its only $1250 and has about 70000kms on it... I wanted it for a spare but realised it'll just take even longer to get the car going and i cant blow it up if i dont get it running LOL

Pretty useless... But it shouldn't matter, if you modify the car just use the EBC for boost reading... Its not something you really need to watch if its all setup correctly... There is a thread on replacing them with stepper motor gauges so they are accurate but i cant find the damn thing...

Could be? Just run another 255L in the tank with it... I have one in the shed that came out of my car that you can have cheap Probably best get on top of that ASAP so you dont damage anything... BTW, worst thread jacking ever....