(Locky)

Price drop on meisters, $700 no tyres $800 with tyres

Went to test fit the KF today, One nut was a bitch to take off. Got it about half a turn then it seized... needed to usle a heap of leverage then this happened FML Fit it up anyway still with the 15mm spacer so effective 18x9-4 But then had a think about it, really hard to find just a pair of 19in KF's (haven't seen one yet). Even if I find a cheap pair by the time I get them, buy new lips, get them cut off and welded back on get the centers of all 4 painted to match. I'm going to be well over the price of just buying a boss set of 19's off Yahoo if I include the purchase of the 18's Have a my eye on a few sets so will see what happens GT-S are for sale, 2k ONO

These wheels came on my v35 Toying with the idea of selling them as I cant help but change the rims on a car to make it feel like mine I actually don't mind them as they are not whored out like most other rays Specs are Front 19x9.5+30 245/35/19 with heaps of tread left Rear 19x10.5+37 275/30/19 have a fair bit of camber wear but heaps of tread on the outside Centres are near immaculate with just scratches around wheel nut holes The lips have had dodgy car wash used on them by the looks and have stains on the clear coat. A polish gets some of it out but still quite noticeable These retail for 80, 000 yen a corner so close to 1k each plus shipping from Japan. Not expecting that kind of money but not going to sell them for $500 either Can include a pair of 25mm spacers which makes the rear a it pretty much perfect for the stretch and slight poke on a V/Z chassis $2000 offers Less without front tyres as im staying 19's Located South west Sydney

Ok found some rims I want Price revised open to reasonable offers $2k ono Or less without front tyres as im sticking with 19's

is your overflow correctly topped up? Rad cap new? could be sucking air back in

generic lip is generic If anyone has an oem lip they want to sell hit men up

American one will blind everyone I used a headlight restore kit.. $40 and a couple hours work Before After

Hit up streeter to source you one best guy can gets his hands on some pretty rare stuff, and had probably the best reputation of anyone as a broker, been round for years. Ive spent 15+K through him jessestreeter.com

Nah that's a pointy nismo one Factory aero follows the line of the bar just adds and inch or 2

Wish someone just remade the factory lip in urethane instead of these massive ones

TBH I got no idea $2250/ offers

All 4 have VOLK center caps as well

These wheels came on my v35 Toying with the idea of selling them if I get a decent offer as I want help but change the rims on a car to make it feel like mine I actually don't mind them as they are not whored out like most other rays Specs are Front 19x9.5+30 245/35/19 with heaps of tread left Rear 19x10.5+37 275/30/19 have a fair bit of camber wear but heaps of tread on the outside Centres are near immaculate with just scratches around wheel nut holes The lips have had dodgy car wash used on them by the looks and have stains on the clear coat. A polish gets some of it out but still quite noticeable These retail for 80, 000 yen a corner so close to 1k each plus shipping from Japan. Not expecting that kind of money but not going to sell them for $500 either Can include a pair of 25mm spacers which makes the rear ait pretty much perfect. For the stretch and slight poke Would anyone be keen /offers?

18x9+9 r disk Bought them for my s14 but tempted do get a pair of shit 19s for the rear and rebarrel them then run the set on the 35

Toying with ideas.....

The stickies .... *shakes fist *

Anyone actually hear back from this guy?

Can tell this is going to take a while to do Even if you are paranoid about how you check out a car, when its covered in filth there are some things that only come out after a week or 2 of driving it and a few times washing the car

Got a quote on getting the lips reconditioned on my Volks because old owner used shit car wash .... Lets just say im going to put the cash towards new rims instead

Need money to fix cars You buy now

No chop off the middle struts. It will make it look likt a type X wing, poeople do it with the s15 aero wing and looks great modded

Helps if they actually accept people

but on 17s you would have to run a 50 profile to get a similar rolling diamiter in a 235 ish so finding tyres would be a bitch

C33/A31 Manual Center console with handbrake boot ect in dark grey $150 C33 Clear headlight and parker light covers *Brand NEW* 400 Look like this C33 parkers (was going to put the covers on these so didn't damage ones on car) 50 C33 headlights (was going to put the covers on these so didn't damage ones on car) 150 Package deal for head lights, parkers and clear covers $500 Pair-17x10+30 meisters 10cm or so cm dish Light rash... 1 has 10cm or so deep rash Brand new tyres 235/45/17 $750 No tyres, $900 with Stock S14 Kouki tail lights 3 piece lights and garnish $250 All gauges are 60mm Greddy White face Green letters 1)Mechanical Boost/vac gauge- Has been retro fitted in japan with LED lighting 2)Electric Oll/water temp gauge- These have peak/warn function included with control unit and sender. working when removed 3)Electric Oll/water temp gauge- These have peak/warn function included with control unit. MISSSING SENDER, but can easily be replaced with generic as same as Defi 4) Electronic Oil pressure gauge. Comes with sender this style has no peak/warn function, was a lil temperamental, not sure if sender or I just had a bad ground $350 Will throw in a working SABER defi style water temp gauge $50 OR will for a quick sale, may be able to scavenge the sender and use that in the greddy, cannot confirm This pic shows the oil pres and water temp Located Campbelltown NSW post at buyers expense

Meh hard to see on a phone Thought it was pretty well covered Stock tyre is what 245/45/18 so do any calculations based on that Profile is a percentage of the width so it is not a linear scale