(Locky)

what oil are you using

One wheel rocked up today as a teaser Good: -look brand new... like less than 1000km on them -dish is epic -looks amazing -should easily be able to mod the center cap to get rid of the fake racing nut Bad: -comes nowhere close to clearing the brembos on the rear and need at least 8mm spacers to clear Thus that makes them 10.5-3 effectively so fairly Mexican As its just on wood its running more camber than it does with a tyre To have a hope of fitting them need to get a 7/8mm spacer, extended studs and run a 245

A leak is a leak obviously But if he ia using a 5w-30 and his car has a lot more km than are on the cluster could try a 40 to see if that helps the issue

What are you using As a car gets older you generally have to go for a thicker oil as the tolerances in the engine get bigger

tried a thicker oil ?

PhillB.. If I decide I can still go lower while on 19in without raping my subframe on catseye that what i'll be going got the motul 5w-40 in mine atm forget the name just a left over bottle a I dont use it in the 14 anymore,might go it agin, or something different

Chrono... high roiling for a street car got to do a service on mine this sunday too FYI go fortune auto over BC

isnt a V36 like a bastard child, not quite a 3.7L? there is lucky to be 10 posts in the entire V section a day why segrigate

veilsides have at least another 20mm these only have 10cm or so Will make they way on to the 14 so I can tuck after the veilsides if I can find a cheap supplier of 19in tyres Or just sell them

This happened Work LS207 in a 19x10+9 Alright till the veilsides get here

Pair.... VS-KF 18x9+9 R disk Perfect front runners 1k with pair of 225/40/18 $900 without Few nicks, little bit of bubbles on centre around center caps OR will swap for another pair of KF's suit rear, 9.5-10.5 wide equvilent roughly to a 10+0 (Cant be picked up till my new wheels rock up for V35 aprox 2 weeks, nothing else I have clears brembos) Campbelltown NSW PAIR Weds Professor meshies 17x9+18 50% 225/45/17 Federal 595RSR semi slicks Heaps of dish, similar design to BBS RS, Have rash and could use a polish $700 Campbelltown NSW Not separating tyres as these are my last set of 17's so cant use the tyres Pair-18x9.5+8 Work euroline XR mesh Rare, only made for 1 year 8 or so cm dish 275/35/18 with bit above indicators $800 No tyres $900 with *Also in pic above of V35* Sit mad on stock body

These more of a EOI as they are about a week or 2 away from landing from japan Bought them for my V35 but after rocking 18's for a few weeks I think I might stick with them Veilside Andrew Golt Apparently they are not super rare, but not common either only 400 sets made by SSR, 19x9+11 19x10.5+5 92mm of dish at the front and 130mm at the rear Would want at least 2.2K for these Look better with out centercaps, was going to try not run them or try and mod them (Random internet pic) Will be here soon Campbelltown NSW

Clear gaurd indicators sold

be careful previous owner ripped one off on my car and it took paint with it

White coupe black te37 or varrostones, couldnt tell while moving in Campbelltown

OR take everything in the photo for 600

looks like a front... dont have a c33 to compare it to though

TBH I'd like a set of non amber USDM ones, but arent worth the effort and cash... If onlky I could get a straight swap from someone in the us... they seem to lover the amber blinkers for some reason, maybe because JDM

Clearing out the last of my laurel parts Clear headlight and parker light covers *Brand NEW* 350 Look like this Even got a spare one so you get 3 Clear side indicators Brand NEW $70 Spare parkers (was going to put the covers on these so didnt damage ones on car) 80 spare headlights (was going to put the covers on these so didnt damage ones on car) 150 Or take all the headlight/clear stuff for $550 Random Shit Bronze bonnet emblem $35 Spare seat belt $25 standard side indicators $25 Assorted tail light loom/plugs (I think) $20 Parts are located in campbelltown NSW Will post at buyers expense

put left tyre on right rim

but with a propper alinment will make minimal difference. If you are worried get the tyre flipped between the 2 front rims so the side with less wwear is now on the inside. I ran nearly 3 deg and still got decent wear

^^ Yeah thats what I mean somne of those bargin Ebay specials you see for new high end tyres are liek 6 year old stock

1.4 deg camber is nothing It's toe that kills tyres

Got to be careful on those ultra bargans, sometimes they are imported out of date stock Besides the odd pair of semi slicks I get most mine from a local place I have a decent relationship with. Not worth the the time and effort to drive a hour half round rrip to save a little cash

come get it if you really want it, doesnt bother me if it stays in my spare room