Calsonic14U

I brought mine for $400 cmon people this is a good price

pics?

So been doing little loose ends today, works been a bit slow so why stand around when theres a 32 to be built. So ran new soft fuel lines in the engine bay, finnished the main engine loom including plugging the ECU in ect inside the cabin. Replaced fuel filter and also hooked up the cool looking SARD fuel pressure reg. I know shes not a 500hp weapon but being a track car always nice to be able to pop the hood and check how your fuel pump is holding up. Especially when and if you run into dramas under load. Just need to get now some silicon boost line for the wastegate, boost control and BOV lines. Also some pipe for intercooler and idle air control vac lines. Getting closer

Ill just wait till you have it all together then come unbolt it one night ninja styles

FULL WRECK SHELL AND ALL IS GONE!!! all i have are the 18 inch rims which are in a seperate thread see my signature

So the best update so far. MOTOR IS IN!!!!! Got the motor in here yesterday. Today i have installed the wiring harness, along with extending the plugs for the TPS and Idle speed control. Also ran the boost line for the Eboost to the manifold. Also looked at a cusion button clutch which i shall be getting next week. Being only aprox 150-200kw nothing major is required...yet. So once i have that 25 box will be going in and hopefully all down hill from there Here is a nice pic.

if only you were in nsw my 32 track car needs a cheap cage lol

hey fatz, i know yo have alot of $hit up there lol. Im after a throttle cable to suit forward facing plenum for my rb20. Wondering if you kept the one out of your last gtst you wrecked with that rb25. cheers

Oh just to let people know, has peak recal on all perameters that the unit covers, injector duration, RPM, boost, Speed, good for proving to the police that you wernt speeding

Got one very usefull and great display options. Free bump-

fit series 2?

Sorry bud but previous post i sold the car about 3 weeks ago, sorry bud

Pic?

So I have bit the bullet and brought the forward facing manifold new from vulture motorsport. Nowhere near a straight fit. After trimming every bolt to mount the manifold top i finnally got it on, and brought all the extra fittings. Installed the short drivers side harnes to the block and mounted throttle body along with replacing all coolant lines. Installed the turbo lines behind the head and now motor is ready to put in hopefully tomorrow. Also sourced a RB20 gearbox crossmember to suit the 25 box. So that is also ready for install. Still finding options for the tailshaft which is my last major hurdle. Heres some more pics

Im in western sydney, blacktown to be precise, i have a 32 at my shop im building i can trial fit a front and rear, i would say yes they would as ive got another set of white 18's similar offset that fit my 33 and 32

Still here, great for a set of track thrashers, brand new tread will last a while theres nearly $500 worth of rubber on them, your basically getting the rims for free

Ima comming to steel it off yah lol

Yah its an aussie company Vulture motorsports. They are in the buisnes section of the sale threads. Its a copy and about a 1/4 of the price. Being that this is a track car im not concerned if it causes a problem later on cause it wont matter if its off the road lol.But ive asked around and this is the only option for the little 20 unless as you say a plazmaman one which im not forking out over $1000 for just a track pig lol. I will definately have dyno sheets up and let you know how it feels on track once shes all up and going TBH i just want to hear her run with the side pipe exhaust im putting on her

Thanks mate, Yah ive just put a S1 33 turbo on for now, just until i can get the motor up and running to sort little gremlins out. Was looking at a 25/30 or equivelent obviously ball bearing and not ceramic. Car will be used mainly for texi and track days, but rarely for drift. So ceramic for now running 10psi hopefully will hold for a little. Ordered the forward facing plenum which sits on top of the standard runners. Then motor can be dropped in. Have re ran coolant lines to delete where the heater hoses used to go to the core. sorted the oil light switch and mounted the short wiring harnes on that side. Unsure wether to run cooling lines to the trottle body still. Am using the standard 65mm Rb20 throttle body so does have the connections for the cooling lines. If not will just loop the 2 ports. So now i play the waiting game, expecting the new shinny chrome manifold to arrive tuesday or wednesday. Getting closer

Hey fatz, you got any other turbo's lying round to suit RB20? Something a little smaller then that monster? Cheers. Also the istrument cluster aswell.

Heres some progress picks as promised saving for intake manifold then she will be put in place.

Tomei just seen alot of people using them, i did get quoted other brands that were local ones but they were same price if not more expensive. I herd they are good but only if you are combining them with a nice turbo upgrade, ecu injectors ect. They were only going to be the PON CAM which doesnt require the replacement of the valve springs ect. The turbo im chasing is probably i hi flowed series 1 R33 turbo, i actually have a stock S1 R33 turbo in my posession but am unsure of its state of repair. Looks ok but never saw it running on the engine i took it off. Then later on probably a 25/30 or something like that.

Just an update guys, motor is 3/4 back together on the stand. Just chasing a forward facing plenum, a turbo and the water line that wraps around the back of the head. Shes been put together with just standard cams for now, once motor is run in and i have more $$$ i will upgrade to the tomei items. Pics will be up shortly of the build process of the motor.

Hi guys i have a R32 gtst track car im building, i already have the gearbox and motor, I require the modified tailshaft that will suit and fit the rb25 manual box to connect with the standard 32gtst rear end. Im in sydney local pickup prefered. Please contact 0439588620 or pm me if you can help. Cheers Luke.

Still for sale guys a few msgs about offset. They are 40+ and roughly an inch of dish on all 4. Very litle gutter rash, only a small spot on 1 of them. Still only $500