sweefu

28/5/13 Adding pair of 15x6.5" wheels with Pirelli tyres, pretty much on the wear indicator. Good condition, no gutter rash or buckles or scrapes. 4x114.3 PCD. $100

Hey guys, I am selling this Kenwood 7" LCD screen headunit, plays DVD/MP3/CD etc $450 Also R33 PowerFC + Hand controller $900 And RB20DET 5 speed gearbox $400 Please PM me for more details

Is it the hand controller which is rare? Thanks.

Hey guys, I need to sell some parts, I've changed cars so need to sell everything that isn't relevant to an S14! I have an R33 S2 which I'm wrecking, there are a few bits left and I'll update with those in a few weeks. 1. Weds Wheels (Guild maybe?) These are 16x8 +30 front and 17x9 +36 rear. Double staggered setup from factory, forged single piece wheel. PCD is 4x114.3 and 5x114.3. The wheels are in exceptional condition, zero buckles or dings, there was a small amount of gutter rash which has been repaired (please see pictures). I'm happy to sell these in pairs as I expect some people won't want to run the double stagger. $400 for this pair or $700 for the set! The 17x9 have 225/45r17 Federal RS (model before RSR) with about 80% tread, 5.5mm in the centre, even wear on both tyres (been on the rear of my live axle R31 for daily duties) $350 for this pair or $700 for the set! The 16x8 have 225/45r16 Yokohama Advan Neova AD07 (again, 1 model old) with a small amount of tread left, at a guess 3.5mm and even wear. I will get some proper pictures of this pair later this week. Sparco NS2 Rally wheels. 16x8 +36 rear 16x7 +32 front. Forged 2 piece wheel. 4x114.3 PCD. Also in good condition, no buckles or dings, small amount of gutter rash which has been repaired (please see pictures). The wheels have 225/50r16 tyres but they are bald, I can remove these for postage at $20 cost. $350 for this set. (more pictures to come later) Kenwood DDX6039 headunit. This is installed in the new car I just bought, but I need to sell this to fund new lifters. It's in very good condition, no worn or broken buttons, screen is nice and clean. Full list of specifications available: Seems to be a good quality unit, motorised face with tilt, beautiful 7" LCD screen, plays DVD/CD/MP3 etc, has 3xpairs RCA preout so can run front/rear/sub, has dual zone volume control so you can listen to music in the front and a movie in the back, or something... Also has the capability for a navigation add on. Comes with remote and wiring harness. $450 for this. Apexi PowerFC and Hand Controller, removed from a running S2 R33 GTS-T RB25DET manual. The ECU is in good condition, there are a few marks on the surface (please see pictures). The hand controller is in exceptional condition, I haven't seen one this clean before. The hand controller was tucked under the kick panel with the ECU, so I don't think it saw much use/playing around. $900 for the PowerFC + controller. RB20DET/RB30 5 speed manual gearbox. Removed from a working car and hasn't been used since, previously had Redline Lightweight Shockproof oil in it. Comes complete with speed sender, release bearing, clutch fork etc but no shifter (I have a short shifter which will be for sale shortly). The input shaft is in great condition too. I bought this as a spare for my R31 but never ended up needing it. $400 for the gearbox. I'm more than happy to post any parts, please send me a message with your postcode for a quote. There will be more stuff updated shortly, R33 S2 parts (suspension, brakes, diff, hubs etc) and I will more than likely be wrecking my R31 next month too (rebuilt differential, tailshaft, rb20det gearbox, custom made clutch, exhaust, s13 suspension conversion, coilovers etc). I would trade for S14 manual conversion parts. Thanks!

Hey guys, I have a Power FC with hand controller to suit R33 GTS-T for sale if anyone is interested Will get pictures on Monday

Hey mate, Are you able to do a cut and shut bellhousing? On an RB25DET gearbox to go into an S14 SR20. Thanks!

Hey guys, For sale is my R31 Skyline. I've owned it for 3 years and bought the car stock, so any parts which have been changed or removed can be put back to standard or given to the new owner if wanted. I have changed the engine oil, power steering fluid, coolant and brake fluid every 2000km and the diff oil/gearbox oil 8000km ago. The coilovers, clutch, brakes, rebuilt tailshaft and diff are all less than 8000km old. Brief rundown of the parts/work done to the car This is the main work done to the car: -Rebuilt diff 3.89 gears, bearings, axle seals, wheel bearings, mini spool -K&B Clutch Engineering custom made clutch -Extractors and 2.5" exhaust, all Hurricane mufflers/high flow cat, made on car -Rebuilt tail shaft, new uni's, bolts -S13 Silvia front LCA/Hub/Knuckle, S13 tie rod ends, longer tie rods, HSD HR coilovers, SR20DET brakes -S13 coilover rear, custom made top hat adapters, adjustable panhard rod -All suspension and steering bushes replaced with nolathane polyurethane -Power steering cooler, oil cooler and filter relocation -Hydraulic handbrake with VS commodore calipers and new QFM A1RM pads I'm happy to take $2000 with R31 suspension/brakes or $3500 with the S13 coilovers and brakes etc. If it doesn't sell by the time the rego runs out (Roughly 5 weeks) then I'll wreck the car down for parts. Would be a shame to wreck such a good car, it's really well set up for anyone wanting to do track work or drifting, or just a weekender or daily too. Thanks.

$1900 with R31 suspension (Monroe GT Gas shocks, Lovell's HD springs) and stock exhaust, still has some rego left too

Is it yours?? New daily?

Richard, was that you in a grey R34 today? With Volk GTC wheels, in Kambah. Schmick looking car!

$2200 with R31 suspension / brakes or $3500 with the current S13 coilovers, brakes etc The rego runs out in June or July

Hey guys, My R31 is for sale - it has clutch, diff, exhaust, s13 coilovers etc and rego. Thanks!

Hey guys, My housemate is selling Denso 720cc injectors and Splitfire coilpacks to suit R32 GTR RB26DETT Thanks

WEDS Wheels. 17x9 +38 rear, 16x8 +30 front.. double stagger! Federal 595 RS rear (before RSR) 225/45r17 80% tread Yokohama Advan AD07 front (some flat spotting on left) 225/45r16 70% tread Very cool wheels, 4x114.3 and 5x114.3. Asking $790 with tyres. Sorry about the crappy pictures, will get some better ones this week

Are people heading out tonight? Or too cold

They don't have base height adjustment, that would be a deal breaker for me. When you lower the ride height you will be compressing the helper spring and shortening the usable stroke of the shock, less than ideal. I'd get some BC as you were thinking, with suitable spring rates.

Do you have a link to the Tanabe? Are they coilovers with damper adjustment and base height adjustment?

I haven't used BC BR, or any BC but I'm sure you'll find they have a generic feel, similar to most coilovers. I use HSD HR, probably very similar if not the same, although the HSD use a larger diameter internal piston (a good thing in my mind, for my application) What sort of driving are you doing with the car? For coilovers similarly priced, in a lot of street / occasional track situations, I don't think you'll notice any difference. I sat as passenger in my friend's car who has the BC ER with adjustable damper and rebound adjustment, these felt pretty different to my HSD and BC BR in friend's cars, but then again, it's whole different car and setup so hard to provide a objective opinion. As I suggested, for a street/occasional track car, I don't think you are going to notice any difference at the cheaper price point.

I might head out tomorrow night, still same place same time?

I'd look in Japan. You can get heavily modified race ready cars so cheap without compliance (track only)

I wouldn't put a 295 on a 9.5" I don't think that would feel very nice at all.

Set of wheels for sale, Sparco NS-II Rally. 16x7 +32 front 16x8 +36 rear. Wheels are in great condition, no gutter rush or buckles. Tyres are all worn. $350

That's just to insulate cables, it will melt near a turbo or something.

S3 1989 R31 Executive for sale. In very good condition, all stock and everything works. Aircon still cold. Owned by an elderly man for the last 11 years. Please PM if interested.

You wouldn't want to put that on turbo oil and water lines