R3N3

so gave the car a clean and had a play with the camera. the one thing i struggle with is framing a shot, so i drove around until i found a reasonably good place for photos. here are a couple of shots i took: these were all taken using my 50mm SMC Super Takumar lens

Bolt straight in, I had to change the plug for the wiring harness though.

after clay bar and polish:

this is how mine is now sitting also

keen on pods, will you ship to nz? been trying to track them down for ages! where in Aus are you located? im in BNE next week. PM me. Cheers

Just the standard camber arms, can't remember the exact number from when I got the alignment.

running 17x10 +15 rear and 17x9 + 15 front

Sent another message

Sent you a message

Im running D1R's. 17x9 +15 (might be +17, cant remember) and 17x10 +15 on the rears. Just rolled guards and they are fine.

Im running D1R's. 17x9 +15 (might be +17, cant remember) and 17x10 +15 on the rears. Just rolled guards and they are fine.

The matt black in 17 x 9 +17 and 17 x 10 +15. See my previous post for side pic. it needed the guards rolled but thats all, no camber arms.

no, the rears were rolled when i bought the wheels, just gotta do the fronts (or possibly gonna buy some dmax +20mm guards) as it rubs

im running 17x10s +15 on the rear with 235 rubber and 17x9 +15 on the front with 225 rubber i have lowered car more in the front since this pic. i have rolled the guards in the rear and i need to do the fronts

they come standard with 16" wheels, so should be fine

You wont need a cat for the warrant, but if you are gonna get a cert then you will need one. Not too sure about the a/c, but I thought those gasses were toxic?? And people have had overboosting issues with those split dumps, the bellmouth ones are the ones to get. Where abouts in NZ are you?

when installing the fronts, i noticed the eyelet for the bolt is off center, so which side faces the front of the car and which side faces the rear?? heres a pic: Cheers Guys

hi, is it possible that someone could give me the dimensions for the JJR combined washer bottle / catch tank? i have tried to buy one, but they wont ship overseas (im in NZ) and i cant find a supplier of them in NZ. My fabricator has lost my catch tank so he will fabricate one for me for a real good price. i would love to buy a RIPS one, but just cant justify the amount of money for one. i realise some people dont like the idea of people "copying" stuff (is the JJR one a copy of the ARC on? as they look very similar), but i cant seem to find good ones without spending a fortune, so this is my last resort Cheers

The iebc is a great unit, I would rate it over the manual one. The dfa is just jaycars equivalent of a safc. Have you shout about getting it tuned? With should eliminate the sluggishness. Food for thought

what steering wheel is that? the car looks awesome too, love the 34 seats.

gtr injectors walbro pump z32 afm hiflow internal gate turbo nistune electronic boost controller im no expert, but by looking at the rb20 turbo upgrade thread, this seems to be a fairly cost effective way???

im with the other guys, you could paint any cooler kit black for stealthiness. and by you driving a skyline your are an instant target for the cops anyway. there is an hdi kit on trademe for 600nzd, surely it will work out nearly the same dollar wise, and they are much better than most Chinese ones (correct me if im wrong). on the flipside though guys you have to remember that 500 aud is roughly 670nzd at the moment, and add roughly 100aud for shipping which equates to nearly 800nzd .

Another place in nz which makes them is racefab.co.nz apparently its around 350nzd, with your guys dollar being so strong, it will be bugger all

they are DotCom racing wheels. the car is for sale too here they are one of the best sets of wheels ive seen on a 33, besides mine haha

i have the 17x10 +15 on the rears, but i have slightly stretched rubber, and a bit of camber to make them fit. like you said, your not keen on camber so i think the only other offset they come (in NZ anyway) is +35, so i guess they are your only option in the 10" rim???