r32gtrdrc

Guys, My new business venture is getting closer and closer so I have dropped the price again.... 42k ( negotiable).. I have also added a bit more detail below and some more pics Recently Completed Build Build History ( can be viewed under new build photos/video tab) see below http://deleeuwracing.wordpress.com Build Details : CAMS LOG BOOKED CAR: Category 3C REGISTERED CAMS TARMAC RALLY CAR Components: FULL TARMAC RALLY SPEC ROLL CAGE RECARO RACE SEATS( Driver/Navigator) FRESH RB26DETT N1 CRATE MOTOR ** appropriate engine no can be confirmed..(approx 8000klm) GARRETT 2860-5's (with uprated actuators) **brand new Haltech ECU **brand new SPLITFIRE COILS WITH BUILT IN IGNITORS **brand new NISMO COPY OIL AND POWER STEERING COOLERS **brand new SARD 660CC INJECTORS 100mm TUBE AND FIN INTERCOOLER **brand new ARC AIR INTAKE BOX **brand new KOYO RADIATOR **brand newew WALBRO 450 E85 FUEL PUMP**brand new DO LUCK G SENSOR**brand new EXEDY PUPP TYPE CERAMIC TWIN PLATE CLUTCH AND LIGHTENED FLYWHEEL **brand new OS GIKEN CLOSE RATIO GEAR KIT 355mm x 32mm front rotors -328mm x 32 rear rotors BREMBO F40/F50 CALIPERS PAGID BLUE FRONT AND REAR PADS 50mm DMS SUSPENSION **Just rebuilt 245/40R17 A050M Advan's COMPOMOTIVE 17 X 18 TH2 +30 RIMs ***Race Car trailer ***2 x Stilo lids ***2 x 3 piece suits plus some spares etc etc... everything can go as a package **If your not in WA its definitely worth a flight over

Race car is now on my105. see link below.. http://www.my105.com/ListingDetails/p/1/k/nissan/id/16220 Looking for 45k (also have car trailer and other parts that could go with the car if required) Additional new build shots can be seen on my basic website below deleeuwracing.wordpress.com (you will have type this into your browser) please pm me if you require any further info/details cheers Chris

Hi, I am currently looking at a new business venture and unfortunately, my recently completed race car is for sale... I am looking to sell the race car c/w trailer spares etc etc. It is a log booked CAMS car. Please see below my105 link http://www.my105.com/ListingDetails/p/1/k/nissan/id/16220 The build is also shown on my basic website..( you have to paste the below into your browser) deleeuwracing.wordpress.com pm me if your interested cheers Chris

Build thread http://www.sau.com.au/forums/topic/417823-r32-gtr-drc-build/ 120K+ + spent... hence my request for EOI's... sell price will depend on what someone wants to pay for it I suppose...but I'm guessing in the current climate it would go for circa 60K...again, its worth as much as someone actually wants to pay for it.. Some brief details below: Brembo f40/f50 calipers( 355 front rotors/328 rear rotors) DMS suspension Haltech -5 turbo's N1 crate engine Twin plate OS&G gearset Compomotive etc etc PM for further info and details/mobile no... happy to discuss with any potential buyers.. cheers

Looking for EOI at this stage... A new business adventure is looming and I am looking at a number of options... Car Build history can be seen under "motorsport builds".... As can be seen... LOTS spent over a 3 year build... pm me for further info if required....serious enquiries only please...

I'm diggin that side pipe.......Did you knock it up or have PSA fab it?( please pm me with a phone no if possible) ta

cheers...

yep and should have the spark issued sorted this weekend

33 months later and its done... did my first testntune at barbagallo last friday and had a few minor ignition-spark issues but all went really well,

Got a paperwork issue with CAMS but will have it sorted in the next couple of weeks, so no barbagallo next week But took it for my first drive today under a permit...( around 20klm's) Man its stout-as

Test and tune at barbagallo's on the 18th Feb if everything goes without a hitch at rego time at the end of this week

CAMS scrutineering now complete and "rego"..... this week.\ Just spent the day applying the old skool decals purchased from GMS.. Finally i can drive this sucker....after.3 long years starting from scratch!!!

Ready for CAMS log book next week and old skool decals the week after that.... should be ready for some action in Feb!!

Finally, done( bar a couple of brackets etc...)

Just come of the dyno and now off for the glass install and a few fiddly bits inside the car. Wont be long before we are back having some fun...

Guy's, I have just checked my "messenger" and there has clearly been some interest in my OS&G twin plate package whilst i have been away...please see pics attached fyi I bought this OS&G complete package for around $2300 and did about 4000klm with it( tarmac rally and circuit klm's) I have stepped up to a new ceramic set up based on the new 600 ish HP forecast for this new build. This package would suit up around 400 HP and both clutch plates have plenty of life( 3.85mm and 4.00mm thick) and could go straight back into a streeter As can be seen it has seen a bit of heat but no big issue for the price.... happy to move the whole package at a third of the price....pm me if you are interested( the entire new build of this car has not been cheap, so any cash form previous parts will assist...... cheers

Month by month its getting closer completion!! Its now ready for some fuel and a dyno....

Not much feedback on the R32 GTR OS&G twin plate or Apexi Power FC....revised pricing below... Apexi pwer FC with hand controller now $500( I have replaced my Apexi with a Haltech unit-which gives me data aquistion capability) OS&G twin plate and flywheel complete package - make an offer see pictues below:

Update Sunday 29th June N1 turbo's sold Apexi FC with handcontroller still available- make an offer OS&G still available-make an offer

Update Sunday the 28th June N1 Turbo's sold Apexi FC with hand controller still available- make an offer OS&G still avaialable- make an offer

I would say 35% left on clutch plates... I bought the new OS&G twin plate set up c/w flywheel for $2300. Used it for a few thousand klm's( race klm's).. Very streetable combo( can do hill tsarts etc without bunny hopin..) Have upgraded to a single pup clutch based on a new 600-ish HP engine combo..( which is not very streeatble and will not do hill starts- but more suitable and race orientated.. You can buy OS&G clutch rebuild kits- check these costs out first and then you can see an all up cost for a totaly new package

Not Djetro..Require AFM's I have changed to the latest Haltech ECU which has launch control and antilag capabilities which doesnt require AFM's cheers

Perth

I am currently up on site( in WA) but return to Perth at the end of this week. I can take some photo's over the weekend and post them up here cheers

Updated Sun the 22nd...( from WA..) 1 x set of motorsport steel wheeled Factory N1 turbochargers - bolt straight on - excellent condition -Now $800 1 x Apexi Power FC c/w hand controller - excellent condition - Now $800 1 x OS Giken - twin plate/pressure plate/flywheel package- used condition -Now $600 2 x std airboxes - bottle of boubon or 2k for the lot!!