BakemonoRicer

Oh lawd.....you're selling... So I'm guessing an Evo is on the cards?

Slab for a shed wouldn't be too difficult. Excavate down about 200mm to remove the topsoil ....can do this with shovel Then you'd need sand (for sandbed), plastic membrane, something like SL82 reinforcement mesh, formwork for the edges (you'd use 19 coated formply, 100x50 timber, and hardwood stakes), and then pour the 32MPa reinforced concrete. Then let the slab cure. Slab would only need to be about 150mm thick

MJH At least you now know your alarm is a good theft deterrent... And yes, your vehicle is very nice so wouldn't doubt they tried to knock it off. Definately make something up to stop them from getting the bonnet up. R32 GTR UPDATE The guy my cousin sold the 32 GTR to is thinking of selling it soon (he's only put 2000kms on it in the past 3 years he's owned it). My cousin is giving him a ring tomorrow to get a ballpark figure of how much $$ he's looking to get for it....then if its low enough might go for a look . Has a forged engine and upgraded turbos etc... I said to Dad if the chassis is 100% straight and original then its worth buying, so Dad said he'd be happy to buy it if so and that he'd sell it to me once I get a full time job .... =D

I suddenly.....feel so safe.. Good to hear my vehicle is non-defectable

The complete rear of my car is stripped out lol..... They could pin me for having no rear seats, no child safety anchor etc etc.... But they didnt notice that because it was nice and dark luckily .

Yeah I pulled over into one of those RBT station's in hornsby just before the freeway on Saturday night near mid night... Didn't get pwned for any of my weight reduction mods.... Police Officer: Have you been drinking? Benji: No sir I don't drink. Police Officer: Can I please see your licence? Benji: Yep here it is... Breath test occurs and all clear Benji: Just out of curisoity if I happened to have forgotten my licence what sort of fine would I have gotten pwned with? Police officer gives me a weird look... Police Officer: $99 mate Then proceeds to ask me if my address is as per the licence to which I say I'm heading back there now..to which he replied okay have a good night mate. I then gave the officers in the RBT station each a little courtesy wave and hit the freeway

Giving my cousin a ring tomorrow night, and going to ask him if he could contact the guy he sold it to to see if he'd be interested in selling.... Just really hope the freakin chassis is straight, immaculate and rust-free. My cousin said when he sold it it was really nice and had no accident history. ..but that could have changed! On the negative side if its been sitting for ages itll cost a fair bit to get back into good mechanical running condition....but then again thats an opportunity for a lowball offer to be accepted and a gtr to be in my driveway (slightly managed to convince my dad that itd be a great car for him to own given how he's retiring soon and should re-ignite his car hobby =D). Inb4 I get a job paying well once I finish uni and transform it into a 800ps R32 GT-R wangan monster equipped with HKS V-Cam Pro and a T51R Kai

I have a Two Guys from Tokyo Initial D Edition S15....does that count

He can't get it to original spec because its been resprayed, had damage, has/had rust and has a rebuilt engine? And I'd guess that he doesn't want to keep the car because he probably intended on selling it for a nice profit =)

My cousin imported a white R32 GTR from Japan around 2005 He took me for a drive in it years ago and I remember getting thrown back in the seat due to slingshot like acceleration! This is what originally got me into imports. Anyway, had look at some old pics of it and the chassis looked CLEAN AS and straight... Talked to my cousin a few months ago and he had sold it to some bloke and it is sitting unused. So going to give my cousin a call later on to get him to find out if the guy wants to sell it. Obviously I'd have to convince my dad to buy the car and it would have to pass a vigorous panel/chassis rail inspection from the panel gap professor aka me....but there is potential to get it for a BARGAIN price.

Hahahaha Meanwhile a page or two back I was telling everyone his car is NOT worth 37k...... and now all you guys know why... Funny how the car Ozco is selling is actually a missile he bought for 10k... In all honesty, I would not even pay 15k for the vehicle given its had previous accident damage and also has had/still has rust....mate when you sell a car you disclose that it has had repairs done and so on rather than claiming the vehicle to be "immaculate".

How much $$ is it?

I think we'd need to pay VIP entry as we'd then be eligible for prizes etc. I'll bring the Bakemono S15 and be apart of the SAU group if all goes to plan.

Thats a bloody awesome picture!!!!!!!

How much would that cost?

Yeah it's been up for sale for quite a while now... Just by looking at the pictures the boot looks slightly out of alignment... Knocked up a quick picture in Paint with commentary to show you what I mean... Basically the panel gaps on each side of the boot are supposed to be exactlyyyy the same. Rear quarter edges meeting the tailights are also supposed to be straight...

I disagree, I wasn't too impressed by that one One of the few immaculate R32's I've seen was the Bakemono R32 GTR that Iron Chef was selling around a year ago, if I had of had the cash that's what I'd be driving. 100% original panel gaps and reflections off the panels looked beautiful and straight (no wavelengths in the panel from the metal being stretched from an impact and not properly repaired). Chef even said no rust and underbody was straight! Was laying down a 600ps at the rears (and only needed bigger injectors and a remap for around 800ps ), only had 24 thou on the odo, and I still kick myself I missed out on this vehicle

Long motor is an engine that only needs some external parts installed. Comes with the head bolted to the short block. There are some differences between rb25de NEO long motor and RB25DE long motor

Wow, thats ridiculous. will email in protest.

Put me on the reserve list please Terry!!

Sell car and get a PULSAR VZ-R N1. Iron chef has one up for sale. SR16VE N1 Engine.... stock 200hp, 1090kg and 6.8 secs 0-100 Put on a full exhaust, apexi power FC, splitfire super direct ignition,etc and youll have around 300hp at the flywheel and 0-100 in 5 second territory.

LOL come on!! Need wingmen if I want to have any chance of pulling bishes at Finny's...! Anyway, going to mow the lawn now.

We should all go out to Finnegan's given itll be a Saturday night

Fairly stock Integras actually don't command 16k. My mate sold a genuine "personal import" JDM Integra Type R with 172.2fwkw (yes, it was built) for 16k which was in absolutely immaculate condition. So getting 16k for a fairly stock ADM Integra is a bit of wishful thinking.

Yep I'll soon let you know the originality of the panel gaps, whether all the seams are in tact, which panels have copped a fresh lick of paint, and a quick look under the car will show whether the car has had structural damage etc.