ANT_32

Rb30et had no intercooler standard and they didn't sht themselves. If it used to be running a gt30, that would be harder on the motor than the little r33 7psi setup.

MODEL: R32 gts ENGINE: RB20DE Mods/ parts: R32 gts ecu and injectors. EBay intercooler kit. S1 rb25 turbo. Pod filter. BOOST: 12PSI FUEL: mostly 98 unleaded. Standard 92 in country tassie when times are tough lot. Power: don't know but beats modified V8 commodores and wrx's at powercruise. Other notes: have now done 30,000kms thrashing the fu#k out of the old girl. Held back on posting a review for a couple of years because I don't want to give bad advice to people. It's now been tested and all I can say is that a turbo setup on a Na with a standard turbo ecu with turbo injectors has the same reliability as a standard turbo engine. Will try to get to a dyno soon. cost: approx. $1000 (turbo,manifold, water and oil lines) $400 (ecu and injectors) $200 (exhaust downpipe, custom intake) $300 (other sh#t) $100

If it's a Na r32 diff it'll be an open r200 4.3 ratio. You can swap a diff centre out of any r200. You just need to shim everything correctly. Don't reckon you need a shorter diff because mine used to be Na and it's really not that bad.

I had this problem. It was the gasket between the turbo and the exhaust manifold.

Sort of looks like it's off an s14. http://www.artperformanceparts.com/nissan-silvia-180sx-s13s14s15.html Scroll down to the s14

I done pretty much the same conversion but using an s14 diff. You need to use your old 4 bolt back cover and use r33 /s14 front mount bolts or buy longer bolts for the front mounts as the non bush types are an inch shorter. Other than that it's pretty simple just got to know if you need to get an abs one or not as GTSboy said

Yeah im only after the one

I am looking for a drift tek 17x8 +34 9 hole 114.3. Don't care about paint or rash. Thanks

You said its got a non turbo computer? What colour are the injectors? pink or red? Also a rooted o2 sensor will cause this.

Anyone got a pair of 5 bolt drive shafts laying around? Also still after an r32 drivers seat belt. Thanks

I'm after a drivers seatbelt for my r32. Will pay for poastage if not local. Text me 0400936486

I'm keen too I think cruises should be a more regular thing in tassie. This will be a great opportunity to meet everyone.

I used a flare nut spanner to do mine

Starter motor

I need a rb20 gearbox for my r32. In good condition. Launceston area prefered but will consider anywhere. Please text me 0400936486