gslrallysport

Spot on! $119 per set front or rear, and both on the shelf.

** S1 Stagea Pads Now In Stock!!! ** Hi all, we've just received our long awaited first shipment of QFM Performance Pads to suit S1 Stagea!!! Available in both compounds, QFM HPX (Bendix Ultimate equivalent, fast street) and QFM A1RM (Ferodo DS2500 equivalent, fast street and track). Prices as follows: HPX Fronts $119 HPX Rear $119 A1RM Fronts $179 A1RM Rear $179 Shipping is free when you order front and rear pads together, or else $8 per axle set individually! Any questions at all just let me know! Regards, Greg

** S1 Stagea Pads Now In Stock!!! ** Hi all, we've just received our long awaited first shipment of QFM Performance Pads to suit S1 Stagea!!! Available in both compounds, QFM HPX (Bendix Ultimate equivalent, fast street) and QFM A1RM (Ferodo DS2500 equivalent, fast street and track). Prices as follows: HPX Fronts $119 HPX Rear $119 A1RM Fronts $179 A1RM Rear $179 Shipping is free when you order front and rear pads together, or else $8 per axle set individually! Any questions at all just let me know! Regards, Greg

Project Mu H16-03. Choice of V8 Supercars, and 12 hours racers all over the world. Have you GTR got Brembo or non-Brembo?

QFM HPX Pads Fitted To VW Golf! http://www.vwwatercooled.org.au/f24/qfm-hi...html#post554180

QFM HPX Fitted To S13 Silvia! No link available, sent via PM on NissanSilvia.com

Actually, one thing I should note, remember that both the HPX and A1RM are performance pads. They would be the equivalent to a Bendix Ultimate or Bendix SRT respectively, just keep that in mind if anyone is comparing prices on pads floating around. As far as just standard, run of the mill street pads go (so equivalent to Bendix GCT), we can do: S2 rears in QFM Super X for $79 S1 Fronts in Japanese made Nisshinbo for $95 S1 Rear in Japanese made Acre for $75 Series 2 fronts are still in HPX or A1RM only.

Hi mate, As Big Fella said, we have S2 Stagea pads on the shelf. If it's just for performance street use, then the pads that we would recommend would be the QFM HPX, which are a Bendix Ultimate or EBC Green stuff equivalent performance wise, and low dust and rotor wear. Part Numbers and prices: Front - GSL009HPX $119 Rear - GSL010HPX $79 Anyone doing track work, then best to step up to the A1RM, which is a Ferodo DS2500 or Project Mu HC+ equivalent. Part Numbers and prices: Front - GSL009A1RM $179 Rear - GSL010A1RM $179 Regards, Greg

Really? http://www.aus300zx.com/forum/showpost.php...mp;postcount=17 http://www.opelaus.com/forums/showthread.p...5398#post375398 http://www.boostcruising.com/forums/index....mp;p=1285952698 http://www.ozmpsclub.com/forum/gsl-rallysp....html#post75096 http://ozvr4.com/forums/showpost.php?p=128...p;postcount=136 http://forums.justcommodores.com.au/gsl-ra...tml#post1041626

QFM HPX Fitted To VX Commodore! http://www.fordlaser.com/viewtopic.php?t=50469&start=120

*** Series 2 Stagea Pads now back in to stock *** Apologies to all those that have been waiting patiently on the back order list, we now have stock of the S2 Stagea pads to suit both street and track. Front HPX $119 Rear HPX $79 Front A1RM $179 Rear A1RM $179 - HPX is a Bendix Ultimate/EBC Green/Project Mu B Spec equivalent performance street pad. - A1RM is a Bendix SRT/Ferodo DS2500/Project Mu HC+ equivalent street/track cross over pad. Any questions, or to order, just swing me a PM, or give us a bell on 1300 884 836. Free shipping when you order front and rear together, or else $8 per axle set individually. Regards, Greg

*** Series 2 Stagea Pads now back in to stock *** Apologies to all those that have been waiting patiently on the back order list, we now have stock of the S2 Stagea pads to suit both street and track. Front HPX $119 Rear HPX $79 Front A1RM $179 Rear A1RM $179 - HPX is a Bendix Ultimate/EBC Green/Project Mu B Spec equivalent performance street pad. - A1RM is a Bendix SRT/Ferodo DS2500/Project Mu HC+ equivalent street/track cross over pad. Any questions, or to order, just swing me a PM, or give us a bell on 1300 884 836. Free shipping when you order front and rear together, or else $8 per axle set individually. Regards, Greg

No. Duncan is correct... Redranger (who have ALWAYS owned Nolathane) merged with Whiteline, but the ownership stayed with Redranger. When Noltec went under their bushes went to Whiteline (as Whiteline Plus) and their alignment products (ie. strut tops) went to Wilkinson.

Spot on, if you're going to compare pads, compare them one of two ways, either compare them to pads that cost the same (which in the case of HPX, would be something like Bendix GCT), or compare them to pads with similar performance and look at the price differences. HPX would be the rough equivalent to Bendix Ultimate, EBC Green, Ferodo TS2000 or Project Mu B Spec, of which I'm sure it's miles cheaper than all of those. And made in Australia to boot.

Quoted for truth.

QFM A1RM Fitted to 246rwkw R33 GTST on track! http://www.skylinesaustralia.com/forums/in...t&p=5400944

Club racer is a step up from the HC+ without being V8 Supercar spec like the H16-03. More like a Ferodo DS3000 than DS2500. But the HC+ will have a wider application range. They are, but they go by a different name.

Hi Jas, Absolutely! If you've got an old set of pads lying around we can get pads made from those backing plates. It's still a bit more expensive than off the shelf pads, but should still be priced well. Custom made A1RM using existing plates are $149 per axle set front or rear, and Comp pads (9 front, 2 rear) are $199 per axle set front or rear. Otherwise if you don't have a full set, we can just use the sample one to get more backing plates laser cut. In that case A1RM are $179 per axle set front or rear, and Comp pads are $229 per axle set front or rear. Regards, Greg

Hi mate, We're the largest stockist of QFM Performance Pads in Australia, give us a bell on 1300 884 836, or email sales at gslrallysport dot com Or PM me here! Street use only, go the QFM HPX, which are a Bendix Ultimate equivalent performance wise. $79 per axle set front or rear. Regards, Greg

That will be interesting considering RDA don't have any stock of Reds or Yellows to suit S2 fronts anywhere in the country... And as a premium RDA dealer we also could've sold EBC Black or Greens off the shelf, but the vast majority of people are happy to wait for the [far better] QFM's if they're not urgent for them. Why did the 'back' need to be in capital letters?

Hi mate, Need an outline of which pads you've got as there's a few variants. Regards, Greg

Rear are on the shelf mate, fronts are still on back order. I'll put you on the back order list. A1RM to suit the front and rear are on the shelf if anyone else is interested. $179 per axle set front or rear. Regards, Greg

QFM HPX Fitted to S13! http://www.fordlaser.com/viewtopic.php?t=50469&start=126

There is no Bendix number for the front of the S2 Stagea. We've got them on the shelf as a custom pad, in both HPX (Bendix Ultimate equivalent) and A1RM (Ferodo DS2500 equivalent). Our part numbers and prices for the front are: GSL009HPX $119 GSL009A1RM $179

QFM Pads Fitted to BA Falcon! No link available, sent via email!