Jump to content
SAU Community

Recommended Posts

I have owned both auto and manual cars in the past, and for around town driving the auto wins. But once you hit the twisty stuff (whether roads or the track) the auto becomes a royal pain in the arse. I prefer a manual simply because of this, and I just put up with the rowing through the gears around town.

If I commuted in heavy traffic in my car I would seriously have considered an auto instead. But auto boxes in general are a sloppy bitch and I prefer to tell the gears what to do directly. Since my car is mostly a weekend warrior there's no sense in it being an auto.

If you are just looking to improve quarter mile times though, stick with the auto. No sense changing the box one way or the other just for that, unless you are aiming for sub 11's or so. In which case the auto with high stall is better.

This Thread was started on " 07-02-2003" try and not bring up threads that are almost a year old. Cheers

sorry redlineGTR I disagree...why start a new thread and say the same things all over again?

Better to dig up an old thread from the dead and continue the discussion

Couldn't agree more Duncan.

As for an Auto versus Manual,,,the manual has to win but only if the cars a daily driver. Who in there right mind would want to drive around the streets with a 3500 stall converter. My neighbours got a 11 sec commodore and it's nothing but a pain in the arse. He actually loves my Skyline only because it's not revving it's head off ALL the time.

Also BMW's SMG M3's while being an auto shifting manual are slower over the 1/4 than the H pattern version and a lot more troublesome.

Neil.

Also remember that the BMW, Alfa, Ferarri and Maserati systems are clutchless manuals, not automatics with up/down buttons.

Personally I think there is a world of difference between the two, autos are far slower to shift....and whats the point of an auto if you always shift it manually.

I'd take the bettter control any day.

Hi guys, it is so much easier and cheaper to build a 9 sec car with an auto. Easier because you can have a narrower per band. Cheaper to buy ($5k versus $17K) and cheaper to maintain as it is much gentler on the rest of the drive line.

In a circuit race car I couldn't even consider an auto.

In a road car, well if I drove only in traffic all the time, then I would have to consider an auto. But I don't, so its a manual for me.

So horses for courses you might say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...