Jump to content
SAU Community

Recommended Posts

I'm moving house soon so I need to get rid of all this stuff that I don't need. Car was written off ages ago and I still have all this stuff left.

Items: All the following items are from a 1992 R32 GTS-T type M

Rear Seat (grey in colour) - Condition is good. It's been in the garage so it's a bit dusty but has no marks or tears as far as I can remember - $50 ono

Boot Lid with spoiler - Metallic Black in colour. Excellent condition, just dirty - $50 ono

Fuel tank - As good as a fuel tank can be. Comes with stock fuel pump still installed :blink: - $20

Front lip spoiler - Black. (Fibreglass) Hooks onto the bottom of the stock front bar. I never used it, I got it with the car. - $50

Stock Rear Bar - Metallic black. Excellent condition. Has reverse lights in it still. - SOLD

Passenger side front quarter - Metallic black. Slightly bent near where the door goes but shouldn't be too hard to fix - $20

Roof trim for inside - grey colour - $40

Stock Intercooler - no piping with it, but the cooler is fine - $20

Side skirts - Black in colour - Stock ones that came with the type m series. One has slight damage on one end where you bolt it on. Can maybe be fixed, I don't know. - $40 for the pair or make me an offer. - SOLD

Power window & mirror controls (for driver side door) - Excellent condition - $50

Various little bits and pieces such as rear view mirror (inside one), instrument cluster (with the tacho, speedo etc on it) about a gazillion nuts and bolts and a few other bits that I can't think of right now.

And the big bit is the whole rear half (shell only) of the car. Contains all 3 rear windows (main one and the two little ones on the sides) and some internal trim pieces. If no one wants the whole thing then I'll chop it up, but I'd rather get rid of the whole thing at once. Panels are straight. Also has rear wiper blade still :)

UPDATE:

I also have the whole rear sub frame - $100

Shocks listed before (i thought they were stock) are actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much - $250

Location:Sydney North Shore

Reason for Selling:Moving house, everything has to go

Price and Payment Conditions: Cash on pickup. No reasonable offer will be refused. If I don't sell it, it's probably going to the tip.

Extra Info: I can take pics if you want, but I don't see any need to take photos of a stock rear bar or stock rear seat etc.

Contact Details: I don't get to check these forums much as I don't use the net much at home and can't do it at work. Best calling or smsing me on 0418 233 525, or email me at [email protected]

I'm very reasonable so make me an offer on these things, you might be suprised at what I'll accept for most of this stuff!

The following things that are sold/destroyed. Please do not ask for them:

Wheels, brakes and hubs (and spare tyre)

Motor and gearbox

Front seats

Doors

Panels not listed

Steering wheel

Handbrake lever and cord

Thanks guys.

Sam

Edited by SamBo
Updated the original post with some prices as I want people to know how cheap this stuff is.

By all means, make me an offer though.

Prefer pickup only.

Ill take the front lip at $50, if you are willing to ship to melbourne,

I can organize courier etc...

Ill wait for the pics tomorrow. then if youll ship i can DD funds straight away..

Pics have been emailed

Not sure about shipping. I'd rather sell stuff locally, the big bits anyway, but we'll see.

Edit: Added Power window & mirror control console (for driver side door) to original post.

Edited by SamBo
Razorsharp, what part of the trim were you after? I have some bits of the boot trim but not all.

hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

hey i am after pretty much all the boot trim. ie 2 sides, and side closest to the back of the car and boot carpet and piece under carpet. which parts of it do you have

also after rear trim... like parts where arms go in the rear and the upper b pillar trim so if you decide to spilt the rear up let me know...

cheers

I have the boot carpet and piece under carpet too.

I also have some bits of trim from inside the boot, but it's not in the best condtion really.

The carpet is grey in colour.

If you want to come and have a look, please let me know

PM sent re springs and shocks

PM replied.

Sorry, I originally thought the shocks were stockies. They're actually KYB Gear Climb, and the springs are slightly lower than stock, but not by much.

Updated original post with price on the shocks. Added rear sub frame to list of available items too.

Cheers,

SamBo

u woulnt happen to have a lh bonnet hinge, rear windscreen(with wiper motor hole) and the left hand quarter glass?

cheers

I don't have the hinge, but do have the rear windscreen and quarter glass. They are all still part of the whole rear half of the car. May chop it up and separate for the right price though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...