Jump to content
SAU Community

Recommended Posts

Hey peeps

The climate control fan has decided to stop working, cool air will come out of the vents in the car but there is nothing pushing it out...

Where is the fan located, is there an easy fix and what can i do about this?

I guess if its not a DIY job ill send it to Nissan.

Car is an R33 (96) btw

Thanks all

Regards

Jazza

Link to comment
https://www.sau.com.au/forums/topic/100576-air-conditioning-help-r33/
Share on other sites

So the fan doesn't work on heat either, right? If it's a dead fan, it means pulling most of the dash apart, and replacing the heaterbox.

If you're lucky, it's just a blown fuse. By your right knee, there is a panel that pops off, and some fuses are there. From memory, one of them is called "blower motor". Check that fuse and let us know! =-]

Sounds like it! I was confused as to why the question was directed at an R33, yet the avatar is an R32.

Oh, btw... might be easier to test ALL the fuses. Might as well since you're there. The one fuse mounted vertically on the left-side is a spare, so it won't do anything.

Sounds like you got a nice collection going jazza hehe

Do you have a favourite? From memory I think you said your R32 had a RB25DET in it??

Here's the interior fusebox. Sorry about the quality, it was a photo taken of my user hand book lol. I think the other 2 fuseboxs have english layouts printed on them?

post-17500-1136367896.jpg

Hey dude, cheers for the diagram

The R32 has an rb20 in it, personally i much prefer the 32. I was looking for a 32 wit rb25 in it but couldnt find it and found one with an rb20 in it that was in great nick!

The 33 is more of a cruisey sort of car, the rb25 makes up for the weight in a straight line (although the 32 with same mods tends to go slightly harder as you can wind up the boost!) but its around the corners the 32 stands ahead. If your looking for a street racer id go a 32, if your looking to cruise around id go a 33. Both have very nice interiors however the 33 is abit more roomy and of course has the advantage of being a newer car!

Edited by jazza08

Damn and Nissan said because they didnt bring them in they dont know too much about them but they'd have a look... they charge through the roof aswell and if they dont know what they are looking for maybe ill go with someone else lol

Maybe ill take it to an air-con place, thanks for ne help :O

There is a DIY thing on here but damn its way too complicated lol

I was just about to say "Nissan Australia mechanics don't know Skylines because there were only 100 32's locally delivered to Australia"...

I recken it might be worth contacting a reputable car stereo place, and ask if they've ever removed the dash before. Then work on the heaterbox fan yourself.

Actually... with some spare time and patience, you can pull it apart yourself if you just go slow and logically. Search for 32 stereo install guides here, because half of them show you how to remove most of the front facia.

Remember this is for an R33 not R32 aswell peeps hehe :)

Im not real keen on doing it myself to be honest mate, dont have the time or patience! I will ring around a few air-con places if nobody has any better recommendations in Perth (preferably SOR).

Thanks for the help Randy!

Hey no worries!

I'm paranoid about taking my car to anyone who is just going to guess like you and me how to remove the dash. (I think you and I would be more careful than some overworked A/C tech)

So personally, i'd still have someone who has pulled an R33 dash apart before do the stripping, then take the faulty unit out and put 12v onto the fan. If it doesn't spin, it's definately dead.

Actually, you know what... whether you take the fan part out yourself or not, I recken this is an auto-electrician's job more than an A/C guy. The piping and gas is all fine, you have an electrical problem. A sparky can check fuses and test the fan, possibly without removing it at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's not any meta data. They have scraped images from everywhere, and then use AI to compare your photo to other photos and work out where you are.
    • I just looked at my camera phone settings, apparently I have "not allowed" for location  Will that stop that app?
    • Can you not just turn it off on your phone if required? I remember a brief on this, well, I remember the brief, not what to actually do. LOL
    • Thanks for posting, your engine bay looks tops. I'm fairly sure you posted the wrong video though, I think you were supposed to upload the one from your "private test road" where it's banging off the limiter with the gate open?
    • This is something to be careful of. I did a bit of digging on the NM35, as I spend a lot of time on near brand new cars and CANBus related stuff, which uses the same "OBD2" plug for a fair chunk of making my life easy. The NM35, does NOT support OBD2. The data pin is actually on Pin3, which is a manufacturer specific pin, and requires Consult3 to connect to the NM35. Your low voltage, is either because the NM35 doesn't have 12V to the constant power pin on the J1962 (OBD2) connector, OR, it is attempting the standard comms, (CanBus, K Line, etc) and can't see any voltage on those pins. Some people have had success accessing SOME data from the vehicle on OBD2 specification, using a module that supports KPW. My assumption, like Duncan has stated, it will likely actually be JOBD, where there is some cross over with the OBD2 and JOBD standards. Note, lots of "OBD2" dongles, do NOT support KPW, which is what you need for a lot of Japanese vehicles of this era (And even up until recent years!), EG, Subaru, Suzuki, etc.    The end of this thread is probably worth a read, as some people did find a way to get a display up in the NM35 recently, looks like someone implemented all the stuff needed to make it work. (The right protocols).  
×
×
  • Create New...