Jump to content
SAU Community

Recommended Posts

i was wondering if anyone else has this problem... when ever im on boost and i go over a bump in the road my rear wheels will bounce but un evenly and it cuases alot of shakes noise and discumfort not to mention the car doesnt like it much either

i was thinking it might have something to do with my LSD or rear suspention not sticking the wheels to the floor hard enough ..

please help

Link to comment
https://www.sau.com.au/forums/topic/100744-rear-wheels-tramping/
Share on other sites

Shock absorbers control the vertical movement of the wheels after the spring has been compressed (by a bump). What condition are the shocks in? You could try the old bounce test, push down on one side of the rear 4 or 5 times rapidly, and then release. It should retun to normal height without bouncing again. If it bounces its new shock absorber time. I would check the front as well, if the rear is stuffed, chances are the front is too.

If the bounce test looks OK, then my next guess would be rear subframe bushes. Have a quick look around the 4 bushes, marked in the following picture with the green dots;

R34_GT_R_Rear_Suspension.jpg

What you are looking for is signs of leaking silicone, sticky goo and split or torn rubber.

Hope that was of some help

:D cheers :D

Edited by Sydneykid

Yeh ive done the bounce test b4 and that is fine .... im at work at the moment so i cant go n look at the bushes. my cars gett8ng close to 100kms im thinking that you may be right .. i just changed the front control arms ball joins were gone maybe its time to change all thebushes aswell

Also another thing .. this only happend if im excellerating over the bumps if i roll over then no matter the speed its fine

The tyres are transmitting the acceleration and twisting torque, shocks and bushes are both relied on to hold the torque.

:D cheers :D

i took my car out for a hard thrash last night and doticed that my car is tramping a lot more now. But ive noticed a little clicking noise now, when i ease off the clutch i can hear a clicking noise coming from the rear, its like with each revolution the wheels do it clicks. (the sound is kinda like if you have a rock stuck in you treds... but there is no rock in my treads) would this be related to anything i have been worrying about.

please if someone could help me ... if i were to take my car to a suspention specialist like Heasman at Tempe would i get charged an arm n leg for them to change my bushes or should i figure out how to do it myself

i took my car out for a hard thrash last night and doticed that my car is tramping a lot more now. But ive noticed a little clicking noise now, when i ease off the clutch i can hear a clicking noise coming from the rear, its like with each revolution the wheels do it clicks. (the sound is kinda like if you have a rock stuck in you treds... but there is no rock in my treads) would this be related to anything i have been worrying about.

please if someone could help me ... if i were to take my car to a suspention specialist like Heasman at Tempe would i get charged an arm n leg for them to change my bushes or should i figure out how to do it myself

Get a quote

:rofl: cheers :rofl:

Do the pineapples provide enough reinforcement to hold the subframe if the origional bushes are or even worse WERE leaking.

Mine tramps like nothing on earth, on the dyno standing next to the car I could see the left rear wheel and subframe attached pull forward.

I'm about to throw a set of bushes through the front and sort out the subframe bushes, Sk you will receive a PM shortly. :P

Noltec do subframe bushes for the R32's, they can be had from UAS for ~$190, but as mentioned are a pain in the arse to get out for the usual home mechanic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...