Jump to content
SAU Community

Recommended Posts

hey guys.

my car (r33 gtst) isn't runing so good.

i swaped my stock AFM with a mates R33 (green lable, that works fine in his car) AFM, and it makes my car run like garbage, the car doesnt idle right, won't even go past 3k rpm in seccond gear. not good to drive at all

i cleaned my dirty AFM with eletrical contact cleaner, and now my car runs just like it did with my friends AFM.

whats the go?? i have 2 ecu's and they both dont like my friends AFM or my now cleaned AFM.

Link to comment
https://www.sau.com.au/forums/topic/100788-car-fussy-with-afm/
Share on other sites

How did your's run before you took out your afm to clean it?

It may not be the afm you know, you could have a significant vacuum/boost leak in your intake piping which will give similar symptoms. Seeing as 2 ecus's dont like it and you've tried 2 afms i'd say you've eliminated both ecu and afm problems.

yea theres severe leaks, before and after the engine, its not good at all... as i said car running bad.

bad = 3/10.... that was with a dirty stock afm, any ecu (both arnt stock, but close enough to it)

with my friends AFM or my now cleaned one, its running really bad 1/10.

i just don't know why the good AFM's don't like my car??

The old

2 bads = running bad

compred to

1 bad + 1 good = running really bad

Happens all the time, the answer is to fix the remaining bad.

In your case the leaks are making the engine run rich. Less air is actualy going into the engine, so the ECU is supplying too much fuel.

This is partially offset by the dirty AFM which sends lower voltage signals to the ECU. Hence the ECU injects less fuel than it would if the airflow was accurate.

When you put a good (clean) AFM on, the ECU sees the correct (higher) airlfow and injects more fuel. The result is even richer running than when you had a bad (dirty) AFM.

The answer.....simple ...... fix the leaks.

Hope that helps

:P cheers :P

Edited by Sydneykid

hehe yea i know... fixing leaks cost money :P, and i also need someone to do it, which would require me to drive my car for at least an hour to a decent mechanic, and im not sure if thats good for the health of my car.... as it just pours black smoke out of the back.

but you have answered my question for now... so thanks

cheers

my cooler piping is fine, it was the first thing i checked. cheers paul. or anything else that i could get my hands onto.

mr mafia, wtf. maybe you could send your grandmar over here so she can lift out my engine. see now that would be somewhat helpful.

hehe, you spend your time bitching about me. and then you say im whinging. goodone jono...

Edited by hijaked

"car fussy with AFM" doesn't equal lazy.

however being currently unemployed is. reason to why i don't have money, also reason why its taken so long for me to get car fixed.

i wish it were a simple pipe leak. but i beleive its a intake manifold gasket..

question was purely about the AFM and it was answerd. i have no intension to come out as a smartarse, you have been on SAU longer and you are also older, so i must respect that. sorry jono

ok, well, I'd check those manifold gasket leaks that you are talking about, and then maybe look at a stuffed FPR or maybe one of your injectors is stuck, or leaking.

So the car is blowing black smoke on idle? It will if it is fuelling too much.

the car pours out the smoke on idle, its black.

the only reason i say manifold gasket, is because i can hear a high pitched air leak sound right at the front of the plennum, i dunno if thats normal, but i couldnt hear it on my friends car.

im gonna send the car to mechanic sometime soon, ive had enough playing around with it.

hopefully it wont cost too much to have the gaskets replaced.

but im sure the dude will have a look aroudn and see what needs to be done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...