Jump to content
SAU Community

Recommended Posts

Well heres a few pics of my car completed! Still have some cosmetics to do like tint, new seats, put my cage back in etc but essentially all the body is done! I decided to stick with the factory Diamond Black - to keep it pimp - and easy to repaint bumpers hehe. Here is some shots straight off the gun. Its certainly come along way from being what it was straight from J back in late 2004.

I whacked on the Final Konnexion body kit with M Sports 25mm Fenders. I rolled the rear guards out about 14mm and I think Im going to space my 18x9.5s out about 15mm and put some camber in. The skirts sit about 2 inches lower than the chassis rails hence my ride height is a bit more than Id like. Ive spaced out 18x8.5s upfront by 20mm upfront too to firstly clear the coilovers but also to fill the guards. I had to raise the car up about 12mm at the front because my tyres started eating fibreglass... but now I dont scrape the front bar at all... a good compromise!

I have attached a preview but the rest are at http://www.sido-takushi.com/paintnpanel/finalk

It cost me $2200 for the fibreglass... all genuine parts... $3k for Panel Beating (you'd understand why if you saw the car... but my pic above can give you a hint) and $3.5k for the paint job. Im fairly happy with it... but it sure did cost alot!

JK

post-11708-1136518903.jpg

Link to comment
https://www.sau.com.au/forums/topic/100884-the-cefiro-is-finally-konnexion/
Share on other sites

Yo Jai!

That looks sik! Well done dude - the long haul is finally rewarding. Motor plans?

Who did you bring in the FK kit through? I have FK skirts/rear bar on my 32 but unfortunately have damaged one of the skirts and am trying to bring in another?

Cheers,

Lyndon

Edited by Remix-

Thats really very very nice. Really not keen on big kits, but I think this is just so well done it looks good.

Ride hight is fine too. Awesome man. Well done.

Dark red leather interior would top it off hey :P

Very the fat... Good too see something other than uras. Who did you get the kit from? Might check what they have for laurels... as that seems a pretty good price :) Ride height looks ok.. You might start ripping of bits of glass if you go much lower

If ur still waiting for that Taxi click on my sig... They should be able to help ^_^

Um I got C-Red in WA to source it for me. www.c-red.com.au

I was told it was a genuine kit although it did take alot of man hours to make it fit up properly... so Im not sure... although I paid good money for it.

JK

Um I got C-Red in WA to source it for me. www.c-red.com.au

I was told it was a genuine kit although it did take alot of man hours to make it fit up properly... so Im not sure... although I paid good money for it.

JK

If it was a genuine then it should have had the final k stamp on the inside of the kit :(

Yeah all the body parts had the old school Final K logo stamped on fibreglass and layed under the top layer of glass... but it cost me $1k in labour to make it all fit... had to cut and tuck the bumpers as they were about 10mm too wide on each side!

JK

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...