Vl Turbo Clutch Into A 33

[wraith_skyline]

Hey guys, a friend of mine has a brass button clutch for a vl turbo, will this fit my 33? any help appreciated

[gtst25]

Shouldn't be a problem. Rb20 clutch is same fit as rb25 and we fit a vl turbo clutch into my dad's rb20.

Put all three clutches next to eachother and they are identical.

[Bl4cK32]

the flywheels are different from memory...

i think the vl's ran a 10", whereas the r32's / s1 r33 ran a 9"

[ctjet]

i should fit its the same series engine just newer

[gtst25]

You can swap any rb starter over so the flywheel must be the same diameter.

All rb g/boxes have the same bolt pattern.

I'm certain all the clutches are the same bolt up pattern.

The r33 series 2's went from a pust to pull type clutch.

If you want to verify this (you really should) goto the stickyed rb30 conversion section in forced induction. Those guys will know as they have been inside just about everything rb.

[Bl4cK32]

The genuine flywheel off the vl turbos are larger in diam. than std rb30 or other rb engines. Im sure of this as i was told when i built my rb30det. From memory the vl turbs may use a different starter (to offset the different size wheel)

[RB30-POWER]

A VL turbo clutch will not fit, its larger.

As i said in this thread of yours already.

http://www.skylinesaustralia.com/forums/in...opic=101090&hl=