Jump to content
SAU Community

Recommended Posts

Well, my auto ECU should be available for testing IF I CAN FIND A BLOODY GEARBOX! :)

Ill donate my stock ECU to testing when i convert, as i have a stock R33 ECU here anyway that ill use as i am changing the harness plug :)

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

Just need to find someone thats willing to spend some time looking into it, i've found no one is really interested at the moment because theres little demand.

One thing i have confirmed is it's definately different to the R33 ECU, and i have been told it could be possible to make the bikirom megaboard work with it.

've been working with Dr Drift on some of this stuff, though not for the series 1 - I'll be putting the grid board in my S2 sometime fairly soon...

If alex is ripping his out that will give us something to look at for the series 1! Alex, make sure you keep it!!! The S1 ecu has to be like something else!

Alex, the main benefit of a remap is that you keep everything the same (ie factory standard) and just change the bits you need to. Thus things like the consult port, and more importantly all the diagnostics! still work, yet you can change all the engine settings... And you can take it straight back to factory default anytime you want (my new rom downloading program is getting ROMs out of cars better than anything else has by a long way :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Also, i have a stock manual R33 GTST ecu to revert if i need to diagnose.

Let you all know how it goes.

We should start a 1/4 mile thread, but i dont think anyone/only few others have been down the 1/4..?

Well if you have not started one by the time my beast goes down the quarter I'll post it up and request it to be stickied. :P

Might give other people a push to take thiers out :P

Thats true, on Feb 4 at AIR there is an event for $50, should take the Stag and see what she can reel off. Then get the gearbox actuator valve job done at MV Autos (eventually) and go back to compare differences.

Ive never done a 1/4mile time before, but would like to compare differences with snow mode, power and normal. All depending on how warm she gets though........

Hi All,

If you want to catch some awesome GTR and Stagea Drag action from Japan, follow this link. Trust me, these things hammer! Love the Silver Stagea fishtailing at the 60 mark! B)

http://video.google.com/videoplay?docid=-8...417181313&q=gtr

If the link doesn't work, go to Google Video, search for GTR, then look for

Ryugasaki Drag Racing-Nissan Skyline GTR 1/4 mile Battle

Hmm, i guess if i had a good tuner around here for that i might think about it, but i have a good PFC tuner so i guess it all depends.

Let you all know how it goes.

Dr Drift can do it (daughter board tune) - and he has a new dyno going in in a few weeks time as well.. :-)

Ian

I was very keen on the remapping idea, then i found out the series 1 ECU is not the same as the series 2, and i was quite dissapointed.

I would prefer this method over an aftermarket ECU for the reasons Ian's just given.

So do you know what it is? Post a photo up of the board, and someone might recognise it.. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...