Jump to content
SAU Community

Recommended Posts

You've got a remapped ecu that is certianly not tuned for your bigger turbo... There is your problem. You can't hear all pinging. It'll be rattling those forgies left right and center and you won't have  clue till you start seeing blue smoke in the rearview mirror.

Dumbest shit ever.

Go and get your car tuned properly before you kill it.

if you had of Listed your mods to start with, explained what you've done, and didn't be a smartassed prick about it you might have gotten better answers. You wonder why people have got no idea what you're on about and can't help you? Noticed the scattered posts that people have left here with no idea?

Is it just me, or does SAU get stupider by the week?

"Everyone, omg, wtf, I just installed a bigger turbo and my car doesn't ping at 20psi! Whats wrong with it!!!!1111oneone!!111!!"

try reading the question properly! in the future instead of writing just wat is in your head, actually y bother if you just want to be a smartass. The reason i didnt list the supporting mods is cause it has no effect on the ACTUAL question, you just wanted to pick s*%t.

secondly you say "Is it just me, or does SAU get stupider by the week?"

sorry we dont all just sit behind a computer and think we r clever cause we can type we can actually do the mods OURSELFS "mechanically minded" instead of paying a performance shop $$$$ to do it for us,

Edited by EVL032
Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1880568
Share on other sites

thanks you actually offered help!!! :D

With a rebuilt turbo it should be more efficent, meaning more airflow at the same psi of restriction. So actually if it was tuned on map it would be more likely to ping and if on maf same thing but max it out sooner and go into rich mapping to avoid detonation, maybe thats why.

A new turbo wont give you more boost on the same setting, (i dont care who you are) its just a setting to tell the wastegate when to open.

My 2 cents.

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1880583
Share on other sites

dipshit, I did the mods myself. I don't tune, because I don't have the equipment.

You started off with the smartassed remarks, and you went on about why your car isn't pinging... thats just a dumb question... I know enough about tuning to know that its not pinging for a reason...which is probably good...

you want it to ping... go and fuel up with 91 octane fuel..

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1881386
Share on other sites

Do you have electronic Boost control?

if so, it shoudl hold the same boost.

Do you have standard Boost control?

if so, I doubt it would just 7 psi just from changing the turbo.

Do you have a blee valve?

is so, it's probably knacker or have been knocked during the refitting and needs to be adjusted back.

Do you have an aftermarket computer?

if not, your stock computer is doing the rich and retard dance.

More details, or we are all pissingg in the wind, and I don't like getting wet.

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1882099
Share on other sites

okay iam over it

i dont want it to ping i know that

isnt this a forum where ppl help, so i was just curious as to y????

read the question

dipshit, I did the mods myself. I don't tune, because I don't have the equipment.

You started off with the smartassed remarks, and you went on about why your car isn't pinging... thats just a dumb question... I know enough about tuning to know that its not pinging for a reason...which is probably good...

you want it to ping... go and fuel up with 91 octane fuel..

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1883864
Share on other sites

EVL032

We need to know everything about the problem including supporting modifications before we can accurately help.

What you have done is said this

I just put new tyres on my bike.

Then I fell off.

Why?

Please give us some more details.

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1883875
Share on other sites

Do you have electronic Boost control?

if so, it shoudl hold the same boost.

yes but its a little old school its the hks ez

that was set on 13 before changed turbo when turbo went back in and no one moved the dial was at 20psi

Do you have standard Boost control?

if so, I doubt it would just 7 psi just from changing the turbo.

the internal wastegate is set at 15psi, but yeh refer question 1

Do you have a blee valve? n/a

is so, it's probably knacker or have been knocked during the refitting and needs to be adjusted back.

Do you have an aftermarket computer? remap

if not, your stock computer is doing the rich and retard dance.

now i got it sorted anyway i got it a 18psi that me happy enough atm, till can re-tune

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1883877
Share on other sites

that was set on 13 before changed turbo when turbo went back in and no one moved the dial was at 20psi

The ebc works on a fixed duty cycle to set boost. If it were a 'learning' ebc where you dial in 15psi and it learns what duty cycle required to achieve that boost level at various rpms then it would be a different story.

I think maybe a boost leak has been fixed up in the process. :P

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1888463
Share on other sites

mmhh yeh i guess so! i agree with that.

yeh there was deffinantly problems before..... but now all good .yay!

The ebc works on a fixed duty cycle to set boost. If it were a 'learning' ebc where you dial in 15psi and it learns what duty cycle required to achieve that boost level at various rpms then it would be a different story.

I think maybe a boost leak has been fixed up in the process. :D

Link to comment
https://www.sau.com.au/forums/topic/101829-pinging/page/2/#findComment-1895083
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...