Hks Gt2835 Pro S -built Up R33

[Color_Of_Green]

Cheers.

So some ajustable rear control arms? any suggestions?

[shonen]

rear UPPER control arms to be precise

this will help in controlling the camber when your car is lowered....

a common skyline problem

[shonen]

btw just out of curiosity...what is the average rwkw figure people are getting from the 2835 Pro S??

As this is currently at the top of my list for turbo choices......was hoping to break 300 barrier with the right tuning and support mods.

[gtst25]

Are you still gettng a decompression gasket? I wouldn't bother. Grepin's getting well over 300rwkw with standard compression and pistons.

Edited April 29, 2006 by gtst25

[Kaido_RR]

Are you still gettng a decompression gasket? I wouldn't bother. Grepin's getting well over 300rwkw with standard compression and pistons.

shit 300rwkw!!!!

no headgasket for now as the labour to install it is more than the cost of the gasket

[Color_Of_Green]

Are you still gettng a decompression gasket? I wouldn't bother. Grepin's getting well over 300rwkw with standard compression and pistons.

At what boost is he running that? what other mods?

[paulr33]

1.4bar

[Color_Of_Green]

Ahh so around 20psi... on stock internals?

[R31Nismoid]

find his thread if you wanna know more... search button

[gtst25]

Got your tune done yet Michael?

[Kaido_RR]

Got your tune done yet Michael?

not yet, there was a mixup with hks in japan and i was sent the wrong gasket it should be coming this week. so i try and get the car in for atune in the next few weeks ehehe

[Kaido_RR]

well, i just had a talk to my tuner and he told me i should be maybe to make 300rwhp @ about 1.2barish :

how much power are u guys making?

[Robo's]

300rwhp, thats only 224rwkw, i think you should be making more than that. Im making more and ive only got a 2535.

[Bunta]

' date='15 May 2006, 03:53 PM' post='2168293']

well, i just had a talk to my tuner and he told me i should be maybe to make 300rwhp @ about 1.2barish :

how much power are u guys making?

You sould go way past 300rwhp!!!

[ookami]

a lot of tuners don't really know what a 2835 pro s will do on an rb25 as it is a fairly new turbo.

[Kaido_RR]

thanks for the reply guys

i just have to wait and see what it does on the dyno when it gets tune later this month...

im just starting to get worry as it looks like im going to have to run 17-18psi of boost and i think it may kill my engine

[ookami]

also don't get too down if it doesn;t make the power as every freakin dyno in this country reads different.

[Kaido_RR]

also don't get too down if it doesn;t make the power as every freakin dyno in this country reads different.

im not too worry about the power, as i really only want 300 to 330rwhp but im just starting to get worry that my engine may die :

i guess i just got to wait and see

[Color_Of_Green]

You're probably looking at around 260-270rwkw @17psi with that setup and good tune, a bit worried about your chinacopy FMIC

And this should be fine on stock internals if you use 98ron fuel and keep oil nice and clean

BTW, what fuel pump will you be using?

Edited May 15, 2006 by Color_Of_Green

[Kaido_RR]

im running a tomie fuel pump...

im f*king the china cooler off and it will be getting replace with a greddy or arc kit very soon.

the tune is book if for the 30th so just got to wait and see