Jump to content
SAU Community

Recommended Posts

MAN you guys are gonna f**ken laugh your heads off at me :), car had a Hidden KILL switch :( its started now :) bahahaha not that it matters ITs being changed for a l28 soon! need new alternator as well might not giving any charge!

Edited by R30kc70UGE
Link to comment
https://www.sau.com.au/forums/topic/101957-r30-not-turning-over/
Share on other sites

r30 not turning over? welll its actually turning over Just not starting And if i try to Jump start it Just Kinda Keeps Trying to turn over But not start And if Not Jump starting the Battery evantually goes Dead!

battery at about 17v

Any ideas? would be greatly appreciated

thanks

casey james

SOUNDS LIKE THE STARTER MOTOR IS f**kED does it click when you try turn it over and is the fuel injected model???

Check your battery terminal connects, and the wires going to starter motor and alternator. My r30 was doing this last month, my battery terminals were dodgy even tho they "seemed" fine to me. But in the end my battery was stuffed too

Can you comprehend that 17V is too high ??

I wasn't disputing that fact, obviously you CAN'T read.

Dodgy connections will NOT give a higher reading than what the battery is putting out.

Yeah Battery Just been Replaced now its Just Clicking when i try to turn it over! :D i know Generally this is the Starter Motor But I just replaced it grrrrr.

might Just build up my Tuff na Motor and Through the engine away!

Refer to first Post, Not sure as to what it is Now Did have an idea but the No noise at all has kinda Just ruined that lol, Any conversion that are simple And Under 900 dollars as i just bought heaps of stuff for my ae71!

Refer to first Post, Not sure as to what it is Now Did have an idea but the No noise at all has kinda Just ruined that lol, Any conversion that are simple And Under 900 dollars as i just bought heaps of stuff for my ae71!

Sorry to Be a Post whore but i really Need Help Ive got it Well i dono how to Describe what its Doing Replaced all the Leads And battery now its just kinda Starting But Not its spinning All the Gear a.c. and do SO on but it just won't start im starting to get really Pissed Of any way of knowing Why it wont start I Just found a wire from the Terminal to the alternator which i fixed just then and still doing the Exact same thing But without the Occaisanal lapse it just keeps going but not going and soon as I let go of the KEy it dies :P please help!!

hey... my mates escort was doing the same thing it would turn and turn but wouldnt start...but he didnt have the wireing harness and was just using a single cable to try and cick it over..i can remember wat he did but when he got the harness it worked..so check to make sure that all ur cables are conected properly...and as stated b4 yeh the starter motor might have dodgy conections or something...

hey... my mates escort was doing the same thing it would turn and turn but wouldnt start...but he didnt have the wireing harness and was just using a single cable to try and cick it over..i can remember wat he did but when he got the harness it worked..so check to make sure that all ur cables are conected properly...and as stated b4 yeh the starter motor might have dodgy conections or something...

lol yeh i remember..it was the altenator..lol check that...lol my bad..maybe mabye not but it doesnt hurt to check..:D..lol cya

Sorry to Be a Post whore but i really Need Help Ive got it Well i dono how to Describe what its Doing Replaced all the Leads And battery now its just kinda Starting But Not its spinning All the Gear a.c. and do SO on but it just won't start im starting to get really Pissed Of any way of knowing Why it wont start I Just found a wire from the Terminal to the alternator which i fixed just then and still doing the Exact same thing But without the Occaisanal lapse it just keeps going but not going and soon as I let go of the KEy it dies :O please help!!

If I've translated this correctly, the engine will now run, but only if you hold the key in the START position; as soon as you release it back to RUN, the engine dies. Is that a correct summation?

If so, then it is possibly a fusible link has blown, or a simple thing like a fuse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...