Jump to content
SAU Community

Recommended Posts

NEW Bosch/Nissan Z32 Airflow Meter.

$300

+ registered post. + $6.35

+ insurance if you wish. + $3.30

http://www.auspost.com.au/

I will only send via registered post as it provides proof. :(

If in SA pickup available

Direct Deposit only.

I can supply plugs OR you can zip down to your local wrecker and pick up a second hand item from a VL or R31 RB30E.

Providing we can get 15 plugs together they plugs can be done for an extra $10.70 each.

As the AFM is a new item from Bosch.

Bosch make the Airflow meters for Nissan.

Buy a Nissan afm and you will find Bosch/Jecs markings on it.

The Bosch Z32's RRP is $450, trade is ~$390.

From memory Nissan want ~$600 odd.

Interested Persons:

----------------

1. 4door_Sleeper - 1 AFM

2. mickr33 - 1 AFM

3. NARDI - 1 AFM

4. dangerman4 - 1 AFM

5. r32_rookier - 2 AFM's, 2 plugs

6. dacow - 1 AFM

7. Iceduck312 - 1 AFM

8. driftstick - 1 AFM, 1 plug

9. Fat32 - 1 AFM

10. Shaun - 1 AFM, 1 plug

11. Sky34 - 1 AFM, 1 plug

12. BOZ22N - 1 AFM

13. Pretender - 1 AFM, 1 plug

14. JL - 1 AFM, 1 plug

15. ausgtr - 2 AFM's, 2 plugs

16. ---- - 5 AFM's, 5 Plugs

17. YLD-CHLD - 2 AFM's, 2 plugs

18. B0oStEr - 0 AFM, 1 plug

19. Skylinecoupe - 1 AFM, 1 plug

20. clayoth - 2 AFM's, 2 plugs

21. Speed safe - 1 AFM, 1 plug

22. Predator

23. SKY34

24. Fangz

Total AFM's - 29

Total Plugs - 21

----------------

Due to a shortage of supply the group buy will not go ahead until....... Bosch are ready. :D

According to Bosch: At some stage there was a manufacturing problem that caused a lot of back orders.

They estimated they would be in surplus by the 1st of May.

Its now the 1st of May and they still have backorders.

Z32 Airflow meters are available in small numbers around various suppliers for the full price but as I said... In small numbers. The supply to these suppliers obviously takes priority over our group buy.

To my surprise, I received a call early this morning, Bosch have now pushed the date to the 1st of July.

Either way, 'eventually' our group buy will go ahead.

For a new afm that you don' t have to worry about for another 10years its an awesome price.

post-382-1137484751.jpg

post-382-1137484775.jpg

Edited by Cubes
Link to comment
https://www.sau.com.au/forums/topic/102021-eoi-new-z32-airflow-meters-300/
Share on other sites

  • Replies 134
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Possibly? I don't mean to sound harsh but I really don't want to be buggered around on this as I'm not making anything on it, in fact its costing me slightly.

For future ppls possibly interested, please be sure if you are interested or don't mention you may be. :P

Edited by Cubes

cubes, you said 'interest' i posted an interest but having re-read my post i think you misunderstood.

i need one for a current car and pending the arrival of a car from japan i might need a second....hence "possibly 2" not "possibly too".

If you have the part number you can buzz any auto parts store and they will give you a price on the Q45/VH41.

Retail for the Z32's are $450.

They can be found at trade for ~$390.

Edited by Cubes

No.. If you want the plug head down to the wrecker and grab one from a VL or R31.

I do have wiring diagrams for both the R32/R33 S1 and the R33 S2.

I don't have wiring diagrams for the GTR's. If some one does, please drop me a pm and I will grab them from you. :)

Its not rocket science though, easy to wire, you have a + feed, earth(s), signal.

Edited by Cubes

Bosch make the AFM for nissan, as NGK make the oxygen sensors for nissan.

So in short its a Bosch AFM, as is the afm you buy from nissan.

See initial thread start post for pics I've attached.

You can see to the left of the flow direction where nissan have their nissan emblem stamped.

Thats correct, you will need 2. Do you want 2?

2 RB20/25 afm would probably meet your requirements depending on power goals? 400rwkw+ will require Z32's.

Edited by Cubes

When will the deadline to pull out? I'll need to confirm with the tuner whether my AFM will maxed out with the 2535/PFC combo or whether he can get around the AFM issue.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...