Jump to content
SAU Community

Recommended Posts

Are the boxes/trans computers the same as the series 3 R31's?

i have a microtech and it is fine, but I am putting a manual valve body computer in it Friday anyway. offtopic:i get fullboost at 4200rpm with a GT42

.91 housing on a Rb30, 265rwkw on 16psi, 620nm of torque in third, giving it

23-24psi friday, has one of Mikes at MV's trans in it

cheers

darren

I got a set of 6 x nismo 550cc injectors - $950 from nengun. They drop straight in. Remember to get new seals from nissan ($10)

Tuner said they were the best he'd seen, and said that they had an excellent spray pattern.

You can't go wrong with these. Don't f**k around with Sards and collars. You'll regret it.

Has any one got any proof, or experience with changing the standard cat convertor over to a high flow 3 inch.

Just wondering the flow difference between the two.

does it change lag much and or out right grunt?

obviously it will flow a lot better, im just wondering on how much better..

Cheers Darren

one more thing.. hey Sydney kid, you recomended the safc to help the afr, how do they compare to a new ecu? i know there not as powerfull, but are they just as efficient, and or reliable for controlling the fuel?

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...