Jump to content
SAU Community

Recommended Posts

Rant <ON>

What s**t's me to tears is the fact that they (Act gov.) spent 3 mill each year for the V8 "super" cars, blocking off streets, special injunctions for the noise and etc and have done little to with the drag strip. Well, except make some noise around election time to get some votes.

You know what s**t’s me even more if they want it they'll push it through. I.e. the evangelist church with 300 parking spaces going up near the Tugg. BMX track... Did you see it in the paper? Did you see any community consultation signes up?

Just like the jail “it is going here and there is nothing you can do about it”!!

Bureaucratic Bulls**t.

They could make this happen quicker but they won’t unless it serves them some purpose.

Rant <OFF>

Edited by NAman
Rant  <ON>

Just like the jail “it is going here and there is nothing you can do about it”!!

Bureaucratic Bulls**t.

They could make this happen quicker but they won’t unless it serves them some purpose.

Rant  <OFF>

ah you must be a jerra person :) if it was close to my home i would be pissed but as its only close to new south welshmen i couldnt care ;) move to canberra if it's so annoying...

ps if you are from canberra why are you complaining :)

Leigh, he's not whining about the fact it's going there, he's angry at the fact that there was no real consultation with the community as to it's location.

Thankyou!

I'm in south act,

The "Jail" is one of many examples of ACT Government [both sides + independents +greens +democrats] and the ACT PLANNING Authority lack of consultation and pushing though what they want!!!

But it is probably with all Local/State gov's

My main point is that the ACT GOV spent 10 mill on the V8's over 3-4 years with road closures and ignoring noise complaints. They could spend that on a drag way which would probably last 10 years.

Yes I admit the Drag way will be running longer than just a week and there are no road closures but yet more Bureaucratic Bulls**t to jump though…

I have said my bit-

I’m going to go have a lie down

Edited by NAman

they should also be putting a track as well just near the dragway, bring the konicka and v8 touring cars here permantly, no need for road closures and lots of $$ for all, from people coming to watch

they should also be putting a track as well just near the dragway, bring the konicka and v8 touring cars here permantly, no need for road closures and lots of $$ for all, from people coming to watch

No they can't Shaun, because that would be the smart thing to do

And they won't get anything out for it them selves

Actually look at the web site posted on the first page- there was a submission to the ACT Gov and the ACT gov committee did their own economic/social study and found it was un-economical, high risk to them and would do nothing to stop illegal street racing!

On an interesting point the ACT police support a Drag way!!

This submission to the ACT Gov by the gov chaired board (in 2004) about the drag way was [in my opion] :

Not written in an argumentative way i.e.: weighting up the pros and cons- it was just the statement of con’s- it was one sided.

Facts and studies for the social and economic perspectives were used- they were always the worse case and were negative- little to none were positive.

It is obvious that the person/s who wrote this was far from pro drag way and really only presented one side of the argument-they may have done this due to political pressure.

Those drag way people have a big uphill fight on their hands !

NOTE the online partition is not recognised by the ACT Government as an official partition. It needs to have you date, name address, signature.- this is not online

Good luck- and hopefully we’ll see something physically to Signe

TR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...