Jump to content
SAU Community

Recommended Posts

OK as far as CAMS goes here's the info:

1st job is to get the affiliation. This entitles us to get L2S licences and compete at club events.

For an event to be coverd by the CAMS Public Liability Insurance we need a permit from CAMS.

To run an event and get a permit issued we need acredited scrutineers, Clerk of the Course, trained Marshalls etc.

This is not going to happen overnight. In the short term we should use organisations like Aaron McGill to run these things for us.

Dino, you 100% sure about the requirements? I thought we were covered as long as we notify cams first. The clerk of course etc is only for speed events, I think.

Oh, and I'll be along :P

If CAMS doesn't give us insurance, just go with McGill, Finlay etc. They already have to have the insurance, so the only cost for them is the day itself.

OK CAMS got back to me.

No probs. as long as we call it a training day or similar and don't have timed evnents and prizes etc.

In the short term this is the go. Eventually we will do Motorkhanas etc.

Lets look at doing it in a couple of months as a Club event.

If you guys wish to organise another event before then and get the insurance etc. don't let the Club event preclude you from doing that.

:D

this is how it is panning out

private daythrough a mcgill

i recon 20 cars max, this means the cost will be around 160(lots of room and everyone gets a really good go

30 car max cost 120 each, getting as cramped as you really would want before getting the shits (we had 40 on sunday and it was too full)

i would rather 150 and get a shitload of time because it would be a shitload of fun and the fact we would be pushing it to get that many car( i personally can fill 7 of these spots)

definate price will be back to me by late this afternoon

pete

Originally posted by red900ss

You participate at your own risk.

The insurance is public liability insurance. Like if Joe Public walks through the course and gets run over.

Yerp i know :) so to be entitled to public liability insurance you have to be a club member ?



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...