Jump to content
SAU Community

Recommended Posts

I am organising with Noltec atm to start a group buy of products for items they have available for Skylines. Items will be straight out of their catalogue for the R30 to R34 skyline

For specific details see here :

http://www.noltecsuspension.com/files/cata...20Catalogue.pdf

(pages 141 to 143 for Skyline components)

I havent received any info on pricing as yet, but the more people the better the group buy will be. I may look at becoming a distributor later if the group buy goes well....

What i need to know from people is what other items (from the catalogue) would you be interested in getting discounts on for you car?

Please look at their catalouge and see what you need, and let me know and i'll see about pricing asap.

Thanks.

Edited by Bl4cK32
Link to comment
https://www.sau.com.au/forums/topic/103037-noltec-suspension/
Share on other sites

Definitely interested in the N82557 kit (adjustable castor bushes, R32 GT-R).

Also, might be interested in the following for the R30:

N44021 - Adjustable Strut Top

N51627 - Lower Control Arm inner bushes

N11217 - Steering Coupling

N11406 - Steering Idler bush

Ok guys ive got some pricing here (except the r30 stuff)

It seems they are prepared to offer their stuff at 20% off on 1 off items, or 40% off on 5 orders minimum.

Some items are expensive, while others are cheaper....

They basically have their own RRP which you take the discounts off.

Examples -

N32840 - Shock Absorber - Upper - Front bush kit ( 4 piece ).

RRP on this is $77.97

-20% = $62.38

-40% = $46.78 (5 orders needed)

N82557 kit (adjustable castor bushes, R32 GT-R).RRP on this is $301.72

-20% = $241.38

-40% = $181.03 (5 orders needed)

PN N52088 Upper control arm assembly (camber adj.)

RRP on this is $691.43

-20% = $553.14

-40% = $414.86 (5 orders needed)

Rear subframe bushes N2447 (incl crush tubes)

RRP on this is $266.20

-20% = $212

-40% = $159.72(5 orders needed)

These are only a rough guide, and prices may come down. As an example the subframe bushes i was quoted $206 for a 1 off item ($6 cheaper) than going by their catalogue.

Let me know what u think of the prices, as i havent added anything to it, im just doing this to help others out. It seems a group buy may be necessary to get the pricing down to where we may all like it.

Edited by Bl4cK32

No worries guys, like i said i can get it cheaper but we need a few orders, so talk to everyone u know who may need some stuff.

im doing this to help us all out - no adding extra $$ for myself.

Check out the catalogue and let me know what else u may want.

Subframe mount N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Edited by Bl4cK32
Subframe mount  N92446 - 1 Incl. crush tubes (R33)

R32 and R34 are the same, but R33 uses a different part number for some reason, however the pricing is the same as the r32/34 item.

R33 item is the same as s13-s15 and 300zx Z32

I am looking at doing this group buy very soon (will put a link in my sig) and it will be open for about a month or so to get numbers and payments etc organised.

Count me in for the complete rear subframe mount

Sure no probs. Im holding off till we get a few people who all want the same items.

If someone orders something though, and i dont think im gunna get any more orders, i'll just put it straight through and they can get the 20% off. Would be nice to get the 40% on all items, but some items are more expensive than others, and not everyone wants the same things.

Might speed things up for those who want the items straight away too i spose, instead of waiting till i get 5 ...otherwise id just put say a 3 or 4 (?) week wait, after starting the group buy, before i put an order in on a spcific item.

It might help if people let me know too when they need the items, as they order. It'll be good to know with when to put the orders in etc...

Interested in..

1x Sway bar - link F 8 -- N21169

1x Sway bar - mount 20mm 2 -- N21063

Thats if the link kit would suit R32 GTS-T front? .. it says 8 bushes.. does that mean it would be enough for front and rear?

Timeframe would be 3-4 weeks (no rush).

ok, Predator - as for your first question about N32840 - whats the shock absorber upper. Andrew from Noltec confirmed that "N32840 is a shock absorber bush not a strut mount"

1x Sway bar - link F 8 -- N21169

RRP is $24.49

20% - $19.60

It would be for both gtr/gtst and it says for the rear only (dont know how many bushes are in the rear?) 8 bushes per kit, and only 1 kit required per vehicle. if you would like, i can confirm as well about this before ordering.

1x Sway bar - mount 20mm 2 -- N21063

Funny enough its not on my parts price list, i'll have to get back to you on that one, but the same part for the r33 is about $22 (~$17.60 with 20% off)

I also now have prices for R30 skylines :D

N44021 - Adjustable Strut Top - Need to confirm on ordering

N51627 - Lower Control Arm inner bushes - RRP $58.43 ($46.75 with 20% off)

N11217 - Steering Coupling - RRP $54.27 ($43.45 with 20% off)

N11406 - Steering Idler bush - RRP $16.97 ($13.60 with 20% off)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...