Jump to content
SAU Community

Recommended Posts

i got my car tuned at unigroup as well.. power was 186kw @9psi

i wasnt prepared to run more than 10, so boost peaked at 10 but peak power was made at 9psi. tuner said approx 200 probably would have been made with 12-13psi..

i asked for a conservative tune (which i got) as i prefer to drive hard and never worry about tune related problems...

stel, do you have the graph with AFR's? post it up if you do...

i got my car tuned at unigroup as well.. power was 186kw @9psi

i wasnt prepared to run more than 10, so boost peaked at 10 but peak power was made at 9psi. tuner said approx 200 probably would have been made with 12-13psi..

i asked for a conservative tune (which i got) as i prefer to drive hard and never worry about tune related problems...

stel, do you have the graph with AFR's? post it up if you do...

sorry mate,

didnt get the graph with afrs (STUPID!!!)

they were about 12.4 at the start, gradually dropping and staying at 12 flat.

The 206.6 is a conservative tune as well.

I basically told them that i want to be able to drive it hard without anything going boom.

nice work

I managed 210rwkw with 13psi, 95 ron fuel and toluene, and yeah the supporting mods (exhaust, powerfc, fmic, standard turbo etc)

I'd still get your fuel pump replaced... all that standard one has gotta do is drop pressure while you're on full song and you're f**ked....

sorry mate,

didnt get the graph with afrs (STUPID!!!)

they were about 12.4 at the start, gradually dropping and staying at 12 flat.

The 206.6 is a conservative tune as well.

I basically told them that i want to be able to drive it hard without anything going boom.

Oh well next time you are around there go and get one printed off!!

my afrs start off like yours but then drop and stay a bit below 12 more like 11.8 so even more grandpa style than yours :D

i have changed my fuel pump already too.. if i were you i would change it as everyone else (and im sure unigroup) would reccomend you do, just for peace of mind.

cool, u coming on the cruise 2morrow?

i changed my fuel pump myself and it was the most painful annoying thing i ever did and my shouler hurt for weeks after plus my skin peeled off so pay someone to do it :P

Edited by siksII

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...