Jump to content
SAU Community

Recommended Posts

anyway i got some os giken cam gears from yahoo japan

worked out all up around 350 (delivered to your door)

they only take one week to arrive air freight and i have ordered a few sets for friends

so in the end if we get a few people who want em works out i get 10 bux a set out of it

so im doing it for love and some beer money and to build up a friendship with my jap buddy

so if we get 10 people im sure the price will drop another 10 bux ext

if ya want a set send us a pm

Pete

0409226626

Link to comment
https://www.sau.com.au/forums/topic/103489-os-giken-cam-gears-350-bux-a-pair/
Share on other sites

all pm replyed to

3 sets have been sent

some general questions people are asking

they fit all rb engines

they are universal

you can adjust your cam timing to give better mid range and top end

and they look cool!!!

cheers

pete

Can I have just one for an R33GTST exhaust camshaft, can't use 2 on them.

Cos of the VCT, yes? Am I right in thinking that if you run an RB20 cam, you can put a gear on it? Just thinking out loud...

Adrian

yea you have to convert the intake cam then you can have two on a r33 gts

if you guys want one just pm me and ill get it out to ya chop chop

pete

Cos of the VCT, yes?  Am I right in thinking that if you run an RB20 cam, you can put a gear on it?  Just thinking out loud...

Adrian

Edited by fatz
  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...