Jump to content
SAU Community

Recommended Posts

Originally posted by GTS-t VSPEC

No, unfortunately it's not from too much sex.

i read the title.. and that what i was gonna say..

hmm.. you could try getting ur mum or sister to patch it up..

after all.. its behind the pedals.. and no-one will see it..

if i was you.. i would get chequerplate floorplates...

GTS-t, Why don't you screw the floormatts down with black screws or just use a good application of velcro. As long as theyre quality matts and secured properly you shouldnt have a problem when racing.

Get them from wherever, but when you pick them up just feel the quality. Don't get crappy thin ones that seem very flimsy... All car matts are flimsy but really crappy ones will feel thin and generally cheap, you can pretty much just tell what car matts r decent and what ones r just crap... Autobarn, Repco etc should stock decent ones...

The best most rugged floor matts I have ever seen cost me $4.

I found a stall at the local wednesday markets and this dude was selling carpet off cuts.

They were $2ea and had a hard rubber under-side on them.

Had them for 2 years in my Pulsar and you could not tell the difference from when I purchased them to the day I sold them (except for the acid stain on the passenger side when a car battery got knocked over :eek: )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...