Jump to content
SAU Community

Recommended Posts

Gday guys just thought id write in and say its time for a new water pump, found it leaking pretty hard during the week. Has anyone elses gone at around 120k's ? Anyway my question is when i put a little coolant in to it up and let it run for like 30 secs i opened the radiator cap and there was foamy type bubbles at the top of the radiator does anyone know why that happened? Engine being to hot maybe? Also im getting it changed on Monday is there anything esle my mechanic should look at/change due to the water pump dying. Any feedback is appreciated thanks

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/
Share on other sites

Well if he is doing the water pump now is a good time for a timing belt change, tensioners, front seals, flush/upgrade/renew radiator. Also, not sure if its the same on an R33 but on my RB20 there is a welch plug behind the water pump which had corred a lot on mine so I guess change that as well.

If your mechanic didnt suggest a new timing kit while doing the water pump I would be very suprised.

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1924307
Share on other sites

u may as well do everything while u have all ur belts off... if ther is foaming bubbles u might also have a air lock.. if its really bad and cant fix it.. u might have to rip ur head off and recon than. careful not to blow ur head gasket in this weather. or u will rip ur head off.. then u can get ur tbelt cam seals front seals tensioners all done.

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1924544
Share on other sites

how do you know what the water pump has carked it? leaks all the coolent, and temp goes skyhigh?

Well with mine there is a small hole under the water pump, (built in safety item) when the seal goes on the water pump water will leak out of the hole under pressure. I had been using a little bit of water, We did a rad comp test, changed hose clamps and still could not find the leak, Then one morning when I started my car I noticed a bit of coolant coming from under the car, and when temp built up it would stop leaking, I then decided to check the water pump. Anyway that’s on my RB26.

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1924553
Share on other sites

Mine's just going at 115,000km..

bubble, bubble.. Hopefully yours hasn't cracked the head or blown the gasket..

I've always stopped when its got to 3/4 on the temp gauge.

most people change it @ 100k... as thats what the 100k service involes.

Going another 20k is asking for trouble!

;)

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1924800
Share on other sites

Wow that was a big reply thanks guys, cars now back on the road. When i bought the car it just had the timing belt done but i dont know what else. My mechanic did a pressure test and everything was ok but i dont know if the tensioners were changed by the last owner. What sort of damage would happen if they fail or what are the signs of them going? didnt have enough money to get them changed this time :blink:

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1940089
Share on other sites

um.. ok same here.. T-belt done in japan at 67kms and its at 93kms now.. dnt knw bout tensioners.. but car engine in tip top shape.. so guessing so.. what will happen if ur belt snaps..? uh picture ur cams miss alinging pushing ur buckets down and holding them piston coming up smashing valves and wat not.? just metal carnage

Link to comment
https://www.sau.com.au/forums/topic/104516-damn-water-pump/#findComment-1940640
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...