Jump to content
SAU Community

I Dont ***in Believe It


Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

in the meantime this is happening while the cops hassle innocent people.... also so many rusting bombs on the road, have seen cars with metal on metal brakes, cane chairs for seats and a drum with a garden hose to the carby replacing a fuel line, also rust holes big enough for a whole family to fit into, tyres balder than (we won't go there) and more smoke than a james Bond special effect

THIEVES are stealing an estimated $100 million in cars annually to support the state's illegal vehicle rebirthing industry.

Gangs with strong links to other areas of organised crime are stealing up to 4000 late-model and prestige cars a year to feed the trade.

The rackets have defied a drop in the level of car thefts statewide to become the number one problem for specialist car theft investigators.

Det-Insp Paul Hollowood, of the Victoria Police stolen motor vehicle unit, said between 600 and 1000 cars, with an average value of about $40,000, were stolen for rebirthing in Victoria every three months.

Rebirthers use stolen vehicles and blend them with cheaply purchased written-off cars with legitimate chassis and engine numbers to transform them into an apparently legitimate product.

Buyers who pay big money for what they think is a new car find themselves with no right to keep it if the vehicle is found to be stolen.

Det-Insp Hollowood said buyers should ask as many questions as possible about a car's history and try, where possible, to buy from a reputable trader.

"You can't ask too many questions. You've got to be suspicious of cars with no service history," he said.

Det-Insp Hollowood said it was hoped a national register of stolen and wrecked vehicles would soon help put a major dent in the rebirthing industry.

He said the next major problem was expected to be stolen vehicles being imported into and exported from Australia.

Motor vehicle squad members recently uncovered four imported Ferraris worth $250,000 each which had been stolen in Japan.

Det-Insp Hollowood's comments came as official police figures revealed the central business district, St Albans, Preston, Dandenong, Sunshine and St Kilda were Victoria's worst places for car theft.

The statistics had 1980s Fords and Commodores filling the top-10 list of cars most stolen.

Police have made substantial inroads in cutting the state's rate of car theft in recent years.

Senior police said the reinstatement of a specialised stolen car squad and designated teams of local detectives, called Tomcat crews, had played a large part in cutting theft figures by 20 per cent.

The Tomcat teams had success working on opportunist thieves who steal cars to commit other offences or for joy-riding.

The crews have concentrated on places hardest hit by motor vehicle theft, seizing stolen cars, drugs and other stolen property worth millions of dollars.

Det-Insp John Noonan said some of the thieves had stolen up to 15 cars a night and more than 80 before being caught.

"Some of them can't remember, they've stolen so many," Det-Insp Noonan said.

Investigators have also noted an explosion in wheel theft around Melbourne. One gang arrested after a Tomcat investigation last year had allegedly stolen wheels valued at $600,000, which they unloaded at wheel and tyre outlets and a fast food restaurant.

Sets of Commodore HSV and SS wheels, valued at between $2500 and $6000, were allegedly favoured by the group of 14.

FFS!!!!

hey DentonR33,

im getting a line just like yours, and although im from sydney, ive been go to melb often, and around that area too.

cant believe the ignorance of these f.ucken cops. i would have done/said just what you did, and then to get canaried?? f.uck that.

to some of these cops, being nice doesnt help, being rude, well you might as well say goodbye to your car.. i think you should report these f.ucks, so they are stuck in traffic duty or somethin, becuase some just dont belong on the road, pulling cars over for defects.

btw, did you get both cops names and stuff, coz im sure you can request them(after all you pay their salary, they are supposed to SERVE you)...and also tell the officer in charge that they speed off unecessarily hehe

well, good luck with it anyways dude!

cheers :burnout:

always be nice and aplogetic and recognise something you have done wrong... i got let off a potential dangerous driving charge by doing this.. which would have been expesnive and potential loss of license. also may perhaps avoid a full inspection of your car where they will try and dick you for your wiper washer fluid being too low etc...

just watch out for female highway patrol officers in cfm boots they have no mercy..

Originally posted by ice180

read todays herald sun traffic mgt cop got caught stealing goods out of a reported stolen car.  it was a setup by internal affairs with video survellience but he still stole the stuff took it home and put it in his garage..... 1200 bucks worth of motorcycle gear..

and that cop will prob be on the road again by next week booking innocent people!

Richie you should be the ambassador of sau vic and take this all the way to the press and to a current affair or today tonight.

hehheheh true when i get my line on the road. last letter I wrote re the cops driving unmarked Monaros got published heheheh.

Yeap can see the promo ad for aca.

"Innocent Skyline drivers being harassed by corrupt police!!!!

"Drivers of modified and immaculately presented Nissan Skyline late model japanese imports are being unfairly targetted by police in Victoria the report goes on to say..

true but if not happy take the c... to court and contest if everyone did that it would clog up the system totally and f... everything up

u know how many people just pay their fines without question. ..

hahhaha yeah ray martin is my best mate..... he loves me I even style his hair for him and jeff kennet heheh..

lawyer mates yeah here and there.

if not happy put ina complaint as you guys have done if still no result contest it more than likely get thrown out of court cops will have costs awarded against them and then officer in question will be reprimanded for wasting taxpayers time and money and more than likely lengthen his time to promotion.

just hope you get a good magistrate. wear a suit and tie and look good speak factually and correctly and have everything documented and copies to prove it. sometime the police will even can the case and withdraw just before court if they know you are serious. take a witness as well.

  • 2 weeks later...

Wow, just found this thread. It's soo disapointing that the Police in the state have such a bad reputation.

"most" of my dealings with cops have been dissapointing to say the leaset.

I too got epa'd recently on my stock as gtr. Ritchie has heard it many times and can vouch for it's Db level. I was just pulled over for a breath test, passed, said nothing and drove slowly away. A few days later, I got a epa letter in the mail. When I drove up to the testing centre in box hill, the test guy laughed and said, "Mate, your car is so quiet, where were you driving?"

He knows how it all works. He said he has even had brand new STOCK cars come in.

This state is out of control! STEVE BRACKS wont be getting my vote.

Ritchie - I remember that incident of yours! hahaha Lucky!

Guest INASNT
Originally posted by DJC

Wow, just found this thread. It's soo disapointing that the Police in the state have such a bad reputation.

"most" of my dealings with cops have been dissapointing to say the leaset.

I too got epa'd recently on my stock as gtr. Ritchie has heard it many times and can vouch for it's Db level. I was just pulled over for a breath test, passed, said nothing and drove slowly away. A few days later, I got a epa letter in the mail. When I drove up to the testing centre in box hill, the test guy laughed and said, "Mate, your car is so quiet, where were you driving?" 

He knows how it all works. He said he has even had brand new STOCK cars come in.

This state is out of control! STEVE BRACKS wont be getting my vote.

Ritchie - I remember that incident of yours! hahaha Lucky!

y dont u get the name of the pig that reported u and then file an official complaint against him with the epa report saying he was talking out his ass like all cops do!

Yeah he was a real power tripper. As soon as I pulled up at the testing area he issued the breath test and another cop went over my car with a torch just trying to find something. My car has nothing out of place so the best they could come up with was the epa.

I think the test came back at 78Db which is nothing. Every 3Db is proprtional to double the audible volume. So a couple of Db is a LOT.

88Db is the limit for cars newer than 1985, (I think) and 90Db for older ones.

Yeah Meggala, sold it to a guy from Sydney who will look after it. Very sad selling the R :D but it's time to move on. Real-estate is my next game.

Guest INASNT
Originally posted by DJC

Yeah he was a real power tripper. As soon as I pulled up at the testing area he issued the breath test and another cop went over my car with a torch just trying to find something. My car has nothing out of place so the best they could come up with was the epa.

I think the test came back at 78Db which is nothing. Every 3Db is proprtional to double the audible volume. So a couple of Db is a LOT.

88Db is the limit for cars newer than 1985, (I think) and 90Db for older ones.

Yeah Meggala, sold it to a guy from Sydney who will look after it. Very sad selling the R :D but it's time to move on. Real-estate is my next game.

its 90db or less for cars newer than 1985 and 95db or less for cars before 1985.

Originally posted by INASNT

its 90db or less for cars newer than 1985 and 95db or less for cars before 1985.

Just got back from having a noise test done on my car at an exhaust place (one of the listed on the epa nitice) . - just wanted to see just how loud it was (before going for my EPA test at Macleod next week)

89.99 db at 3200 rpm

it did go up to 90.1 but the revs had gone just over the 3200 mark...

He said he would have passed it, but agreed that EPA at Macleod would probably give me grief over it...

bugger !!

I have to change my muffer just for .1 of a DB !!!!

(also have to change it because they won't accept removable siliencer tips unless they are welded in... and I ain't welding the removable tip into a jasma muffler for anybody :))

Getting a Truck muffler place to make me up a custom baffled muffler - nice hi flowing one - should shut it (and them) up once and for all (I hope)...

biggest problem we have with our Skylines is our turbos.....

You can make them 89db at 3200 rpm for a noise test... but there ain't no boost happening during the test.... get them on the open road with 14psi going through them and you are Way Over 89db

So if a cop hears you on boost - your probably going to get dicked...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...