Jump to content
SAU Community

Recommended Posts

Hey guys and girls, was wondering if anyone can help me out please...is the 044 only an external pump or can it be an internal aswell?

i currently have an 019 and its maxing out, but i dont want to setup an external pump system...any suggestions?

thanks in advance.

oh yeh its for an R32 RB20

Link to comment
https://www.sau.com.au/forums/topic/104909-info-on-bosch-044/
Share on other sites

get a 984 then, doubt you'll be making more than it can handle with an RB20

DIY section has all the answers

Whilst thread is for the R33, the R32 cant be a world apart from whats in there, so great start for you

http://www.skylinesaustralia.com/forums/in...showtopic=67683

:D

the 044 is listed as external but works internally.

same goes for the 984 in addition they have a hose end on the bottom and a female fitting on the top. they are a tiny bit shorter than the 044 and that makes em easier to fit.

the 040 has an open end.

fuelpumps.pdf

Edited by wolverine
Bastard!

How about an answer to my question though?

If you can fit it intank and you need the extra *oomph* then sure mount it intank.

I only want 200kw's at all 4's so for me I just went with the 040.

Greg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...