Jump to content
SAU Community

Recommended Posts

it seems like dynodynamics on shootoutmode is the popular choice for a dyno readout but ive heard recently that autosalon changed their dyno to a mainline dyno . which one is more accurate?

two different dyno's (mainline and dyno dynamics) in the same city (around 5 klms apart), two days apart with similar barometric conditions. read within less than 1% of each other. With the same vehicle.

Not bad eh!....pretty acurate

ive heard recently that autosalon changed their dyno to a mainline dyno . which one is more accurate?

and yeah, just on that... the Cabin group have been using mainline dynos since 2002/3.

So its far from "recent" news

two different dyno's (mainline and dyno dynamics) in the same city (around 5 klms apart), two days apart with similar barometric conditions. read within less than 1% of each other. With the same vehicle.

Not bad eh!....pretty acurate

Where?..which dynos? Anytime I have seen the same car go on a dynolog and then a dynamics, the dynamics always reads about 10-15% higher.

Where?..which dynos? Anytime I have seen the same car go on a dynolog and then a dynamics, the dynamics always reads about 10-15% higher.

Croydons...then Autosalon....and it was Stacey's car...so i should know.

Edited by DiRTgarage
Croydons...then Autosalon....and it was Stacey's car...so i should know.

I didn't say you didn't...but I think Cabin must have a 'special' version of the Dynolog software.

I know of a wrx that made 20% more power on CRD's dyno in the afternoon than it made on a Dynolog in the morning. There were no changes in between. Had the same tank of juice and all.

All the other dynologs I've seen read very similarly (comparing the same cars on different days)

did you record the temps on that day?

you said morning and arvo... so my bet there could have been a reasonable temp difference.

end of the day, does it really matter? anyone can can get any figure if you need too

did you record the temps on that day?

you said morning and arvo... so my bet there could have been a reasonable temp difference.

end of the day, does it really matter? anyone can can get any figure if you need too

Yep...it was slightly warmer in Syd than the gong...only a degree or 2.

Yep..I agree

I didn't say you didn't...but I think Cabin must have a 'special' version of the Dynolog software.

I know of a wrx that made 20% more power on CRD's dyno in the afternoon than it made on a Dynolog in the morning. There were no changes in between. Had the same tank of juice and all.

All the other dynologs I've seen read very similarly (comparing the same cars on different days)

Well how does this grab ya...Carlos from Millenium Motorsports ran 599kw at Queensland 2 days before Autosalon on his Mainline dyno...and at the same boost levels ran 601kw on Autosalon's dyno.....he must have the "special" software too!

Mainline dyno's even run the same no matter if its 2WD or 4WD...we proved it in front of hundreds of people at Final Battle...there was 1kw difference between the runs.

I think what Mik is trying to say is Croydon's dyno is happy...if its so happy i should be rolling almost 520AWKW......i think im gonna have a word to Jim about my deflated power figures.

Edited by DiRTgarage
I Have seen IDENTICAL results on two different dynologs equate to 40awkw more on two different dynodynamics dynos in an unchanged trim/tune. Just my experience.

highly experienced acredited operators should not have such a discrepancy...as essentially the dyno's use similar hardware.

Edited by DiRTgarage

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...