Jump to content
SAU Community

Recommended Posts

First to lay down the background, have a read of this thread about the ATF coolers.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

Now, I can offer these coolers 678 DC coolers with 3/8inch fitings for $118 each plus postage and handling. Pickup available in Blackburn area in Melbourne, postage anywhere in Australia also available. Postage costs will vary. Handling fees will be fixed at $10 for each item (to cover bubble wrap, packing materials, going to the post office etc).

Worst case scenario, to the middle of nowhere, postage will be ~20$ (Thats like postcode 0830 in NT). Sydney/Adelaide should be around $10, Melbourne $7, Brisbane $13.

These RRP for $150, but you need to go pick em up etc, they are not delivered to your door (yes, i am THAT lazy :))

I dont need to explain the product here, just read the thread above. Suitable for any Auto trans

So, who is interested

1. humble - picked up

2. bwilkeson - delivered to adelaide

3. pkblade - delivered to adelaide

4. skidkid - 2 units delivered to tassie

5. wagon - delivered to melbourne

6. AMS - delivered to country NSW

7. Nightcrawler - delivered to adelaide

8. MR_RS4 - delivered to brisbane

9.

10.

Once we know who is interested, I will send out the details of where everyone will need to make the payment. But for now, lets get some names.

Link to comment
https://www.sau.com.au/forums/topic/105610-gb-davis-craig-678-atf-coolers/
Share on other sites

Updated, will close the group buy in 1 weeks time on Wednesday 22nd. Then we will order and probably have them by the weekend. Then we can ship them off first thing monday for everyone.

Sure, 100%. Just thought the drive might be more expensive then getting it posted to you is all.

Obviously we will arrange pickup/delivery etc next week when I got buy them.

Anyone else interested?

Sent out PM's to all that were interested. Let me all know how it goes, cheers :P

Thanks, look'n 4ward to it!

Will have to scoure the thread 2 make sure I install it correctly!!

As far is I can see, and the info given to me by Abo Bob etc, there's nothing to it Bendan. If you want to have a 'fitting bee' in my garage one weekend, give me a yell. Probably easier with 2 guys?!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...